gNodeB Events  <event> 

Events which an gNodeB can initiate

Type:

  gnbEventType
RESTRICTIONS
DESCRIPTION
USED IN
registration UE Registration n2
deregistration UE De-Registration n2
pdu_session_establish PDU Session Establishment n2
pdu_session_release PDU Session Release n2
handover Performs an N2 Handover. This event must be triggered on the target gNB node. n2
xn_handover Performs an Xn Handover. This event must be triggered on the target gNB node. n2
ue_context_release_request_user_inactivity Initiates a UE Context Release Request due to User Inactivity n2
ue_context_release_request_ng_ran_generated_reason Initiates a UE Context Release Request due to NG-RAN Reason Inactivity n2
ue_context_release_request_ims_fallback Initiates a UE Context Release Request due to IMS voice EPS fallback or RAT fallback triggered n2
ue_context_release_command_successful_handover Initiates a UE Context Release Command from the Server due to Successful Handover n2
service_request Initiates a Service Request n2
service_request_emergency Initiates a Service Request for Emergency n2
service_request_emergency_fallback Initiates a Service Request for Emergency Fallback n2
add_rule Initiates adding a predefined rule. n2
qos_mod Initiates modification of qos parameters for a QoS Rule. n2
delete_rule Initiates removal of a QoS Rule. n2
ue_radio_capability_info_indication Initiate a UE Radio Capability Info Indication Check. n2
ran_configuration_update Sends an RAN Configuration Update to the AMF. n2
send_sms Sends an SMS message from the UE over N2. n2
ran_configuration_transfer Sends an RAN Configuration Transfer message from the gNB over N2 to the AMF. n2
cell_traffic_trace Sends an Cell Traffic Trace from the gNB over N2 to the AMF. n2
trace_failure_indication Sends an Trace Failure Indication from the gNB over N2 to the AMF. n2
lpp_provide_capabilities Sends an LPP Provide Capabilities message toward the AMF. n2
lpp_request_assistance Sends an LPP Request Assistance message toward the AMF. n2
lpp_provide_location Sends an LPP Provide Location message toward the AMF. n2
initial_context_setup_failure Sends an Initial Context Setup Failure Message the AMF. This would generally only be done if the received Initial Context Setup Request was capatured. This is generally only performed for doing negative testing and will cause unpredicatble behvaior within the UE/gNB n2
nas_non_delivery Sends a NAS Non-Delivery message to the AMF. This would generally only be done if the received NAS message was capatured. This is generally only performed for doing negative testing and could cause unpredicatble behvaior within the UE/gNB n2
qos_flow_mobility Intiates a QoS Flow Mobility procedure. n2
reset Resets the current transaction by sending an NG Reset message from the gNB. n2
reset_all Perform an NG Reset with Reset All from the gNB. n2
none Stops the referenced node action. Note: Application (app::xxx) should never be used with event::none in a node-specific command.

PARENT ELEMENTS

Parent

Type

gNodeB Action <action> gnbActionType
gNodeB Action <action> gnbActionResponseType