RESTRICTIONS |
DESCRIPTION |
USED IN |
REF POINT |
| attach |
UE Attach |
s1 |
S1 |
| attach_without_pdn |
UE Attach Without PDN |
s1 |
S1 |
| detach |
UE Detach |
s1 |
S1 |
| tau |
Tracking Area Update (TAU) |
s1 |
S1 |
| service_request |
UE Service Request |
s1 |
S1 |
| cp_service_request |
UE Control Plane Service Request |
s1 |
S1 |
| ue_context_release_inactivity |
Initiate a UE Context Release due to user inactivity. |
s1 |
S1 |
| ue_context_release_radio_lost |
Initiate a UE Context Release due to Radio Connection With UE Lost. |
s1 |
S1 |
| ue_context_release_eutran_reason |
Initiate a UE Context Release due to E-UTRAN Generated Reason. |
s1 |
S1 |
| ue_context_release_misc_unspecified |
Initiate a UE Context Release due to misc unspecified reason. |
s1 |
S1 |
| ue_context_release_protocol_unspecified |
Initiate a UE Context Release due to protocol unspecified reason. |
s1 |
S1 |
| ue_context_release_radio_unspecified |
Initiate a UE Context Release due to radio unspecified reason. |
s1 |
S1 |
| ue_context_release_transport_unspecified |
Initiate a UE Context Release due to transport unspecified reason. |
s1 |
S1 |
| ue_context_release_load_balancing_tau_required |
Initiate a UE Context Release due to load balancing TAU required. |
s1 |
S1 |
| ue_context_release_cs_fallback |
Initiate a UE Context Release due to CS Fallback. |
s1 |
S1 |
| create_pdn |
Performs a PDN connectivity request. |
s1 |
S1 |
| delete_pdn |
Performs a PDN disconnect request. |
s1 |
S1 |
| create_dedicated |
Requests a UE initiated Dedicated Bearer. |
s1 |
S1 |
| delete_dedicated_enb |
Requests an eNB initiated Dedicated Bearer Delete. |
s1 |
S1 |
| handover |
Performs a handover. |
s1 |
S1 |
| x2_handover |
Performs an X2 handover. |
s1 |
S1 |
| redirect |
Performs an Redirection. |
s1 |
S1 |
| send_sms |
Sends an SMS message from the UE. |
s1 |
S1 |
| enb_configuration_transfer |
Sends an eNB Configuration Transfer to the MME. |
s1 |
S1 |
| enb_configuration_update |
Sends an eNB Configuration Update to the MME. |
s1 |
S1 |
| enb_direct_information_transfer |
Sends an eNB Direct Information Transfer to the MME. |
s1 |
S1 |
| cell_traffic_trace |
Sends a Cell Traffic Trace Message to the MME. |
s1 |
S1 |
| context_suspend |
Sends a UE Context Suspend Request to the MME. |
s1 |
S1 |
| context_resume |
Sends a UE Context Resume Request to the MME. |
s1 |
S1 |
| secondary_node_addition |
Intiates a secondary node addition procedure. |
s1 |
S1 |
| secondary_node_release |
Intiates a secondary node release procedure. |
s1 |
S1 |
| location_report |
Sends a Location Report message to the MME. |
s1 |
S1 |
| lpp_provide_capabilities |
Sends an LPP Provide Capabilities message to the MME. |
s1 |
S1 |
| lpp_request_assistance |
Sends an LPP Request Assistance message to the MME. |
s1 |
S1 |
| lpp_provide_location |
Sends an LPP Provide Location message to the MME. |
s1 |
S1 |
| lppa_request_location |
Sends an LPPa Request Location message to the MME. |
s1 |
S1 |
| secondary_rat_report |
Sends a Secondary RAT Report message to the MME. |
s1 |
S1 |
| qos_mod |
Sends a Bearer Resource Modification Request message to the MME. |
s1 |
S1 |
| csfb |
Sends an Extended Service Request Message requesting CSFB to the MME. |
s1 |
S1 |
| initial_context_setup_failure |
Sends an Initial Context Setup Failure Message the AMF. This would generally only be done
if the received Initial Context Setup Request was capatured. This is generally only performed
for doing negative testing and will cause unpredicatble behvaior within the UE/gNB/N3IWF |
s1 |
S1 |
| reset |
Reset parts of a S1 Interface |
s1 |
S1 |
| reset_all |
Reset all of a S1 Interface |
s1 |
S1 |
| reset |
MBMS Reset |
m3 |
M3 |
| reset_all |
MBMS Reset All |
m3 |
M3 |
| update |
MBMS MCE Configuration Update |
m3 |
M3 |
| none |
Stops the referenced node action. Note: Application (app::xxx) should never be used with event::none in a node-specific command. |
|
N/A |