RESTRICTIONS |
DESCRIPTION |
USED IN |
| reroute |
Initiate AMF reroute for a UE registration request. |
n2 |
| paging |
Initiate a Paging Request to a UE. |
n2 |
| ue_radio_capability_check |
Initiate a UE Radio Capability Check. |
n2 |
| add_rule |
Adds a rule that could result in the creation of or the update of a new QoS Flow |
n2 |
| delete_rule |
Deletes a rule that could result in the deletion of or the update of a QoS Flow |
n2 |
| guti_realloc |
Initiate a GUTI Reallocation procedure to a UE. |
n2 |
| send_sms |
Sends an SMS message from the network to UE over N2. |
n2 |
| amf_configuration_update |
Sends an AMF Configuration Update to the gNB. |
n2 |
| tnla_actions |
Sends an AMF Configuration Update with one or more TNLA actions (add, modify, delete). This
action needs to be accompanied by 1 or more n2_tnla_action configuration parameters to provide
details about the action(s) requested. |
n2 |
| ue_tnla_binding_release |
Sends a UE-TNLA Binding Release from the AMF. |
n2 |
| ran_configuration_transfer |
Sends an RAN Configuration Transfer message from the AMF over N2 to the gNB. |
n2 |
| ue_context_modification_request |
Sends a UE Context Modification Request from the AMF. |
n2 |
| trace_start |
Sends a Trace Start from the AMF. |
n2 |
| deactivate_trace |
Sends a Deactivate Trace from the AMF. |
n2 |
| lpp_request_capabilities |
Initiate a Request Capabilities Message to the UE |
n2 |
| lpp_provide_assistance |
Initiate a Provide Assistance Message to the UE. |
n2 |
| lpp_request_location |
Initiate a Request Location Data Message to the UE. |
n2 |
| lpp_request_location_agnss |
Initiate an LPP Request Location Message with a request for a-gnss data. |
n2 |
| lpp_request_location_otdoa |
Initiate an LPP Request Location Message with a request for OTDOA data. |
n2 |
| lpp_request_location_ecid |
Initiate an LPP Request Location Message with a request for E-CID data. |
n2 |
| ue_policy_delivery |
Initiate UE Policy delivery to the UE |
n2 |
| notification |
Initiate Notification to the UE |
n2 |
| reset |
Resets the current transaction by sending an NG Reset message from the AMF. |
n2 |
| reset_all |
Perform an NG Reset with Reset All from the gNB. |
n2 |
| use_next_ip |
Use Next Ip for User Plane Data |
n2 |
| reset_protocol |
Reset the protocol state machine |
n2 |
| ue_auth |
Initiate UE Authentication |
nausf_auth |
| aka_confirm |
Initiate 5G AKA Authentication Confirmation |
nausf_auth |
| eap_session |
Initiate EAP Authentication Session |
nausf_auth |
| reset_protocol |
Reset the protocol state machine |
nausf_auth |
| retrieve_nssai |
Retrieve Network Slice Selection Assistance Information (NSSAI) |
nudm_sdm |
| retrieve_multi |
Retrieve Multiple Datasets |
nudm_sdm |
| retrieve_am_data |
Retrieve Access And Mobility Subscription Data |
nudm_sdm |
| retrieve_smf_sel_data |
Retrieve SMF Selection Subscription Data |
nudm_sdm |
| retrieve_sm_data |
Retrieve Session Management Subscription Data |
nudm_sdm |
| retrieve_sms_data |
Retrieve SMS Subscription Data |
nudm_sdm |
| subscription |
Send SDM Subscription request |
nudm_sdm |
| unsubscribe |
Send SDM Subscription delete request |
nudm_sdm |
| reset_protocol |
Reset the protocol state machine |
nudm_sdm |
| register_3gpp |
Register AMF for 3GPP service |
nudm_uecm |
| retrieve_3gpp |
Retrieve AMF for 3GPP service |
nudm_uecm |
| update_3gpp |
update AMF for 3GPP service |
nudm_uecm |
| register_non_3gpp |
Register AMF for Non-3GPP service |
nudm_uecm |
| retrieve_non_3gpp |
Retrieve AMF for Non-3GPP service |
nudm_uecm |
| register_smf |
Register SMF |
nudm_uecm |
| delete_smf |
Delete SMF registration |
nudm_uecm |
| register_smsf_3gpp |
Register SMSF for 3GPP service |
nudm_uecm |
| retrieve_smsf_3gpp |
Retrieve SMSF for 3GPP service |
nudm_uecm |
| deregister_smsf_3gpp |
Deregister SMSF for 3GPP service |
nudm_uecm |
| register_smsf_non_3gpp |
Register SMSF for Non-3GPP service |
nudm_uecm |
| retrieve_smsf_non_3gpp |
Retrieve SMSF for Non-3GPP service |
nudm_uecm |
| deregister_smsf_non_3gpp |
Deregister SMSF for Non-3GPP service |
nudm_uecm |
| reset_protocol |
Reset the protocol state machine |
nudm_uecm |
| establish |
PDU Session Establishment |
nsmf_pdu_session |
| release |
PDU Session Release |
nsmf_pdu_session |
| service_request |
PDU Session Service Request |
nsmf_pdu_session |
| add_rule |
Initiates adding a predefined rule. |
nsmf_pdu_session |
| qos_mod |
Initiates modification of qos parameters for a QoS Rule. |
nsmf_pdu_session |
| create_sm_context |
Create SM Context service operation shall be used to create an individual SM context, for a given PDU session.
In order to establish the PDU Session, it must be followed by N1N2MessageTransfer service operation and the Update SM Context service operation.
|
nsmf_pdu_session |
| update_sm_context |
Update SM Context service operation shall be used to update an individual SM context, for a given PDU session |
nsmf_pdu_session |
| retrieve_sm_context |
Retrieve SM Context service operation shall be used to retrieve an individual SM context, for a given PDU session |
nsmf_pdu_session |
| release_sm_context |
Release SM Context service operation shall be used to release an individual SM context, for a given PDU session |
nsmf_pdu_session |
| n2_resource_release_ack |
Simulate the receipt of N2 Resource Release ACK condition |
nsmf_pdu_session |
| activate_user_plane |
Activate the User Plane connection of a PDU session. This is used for "UE Triggered Service Request" Procedure. |
nsmf_pdu_session |
| deactivate_user_plane |
Deactivate the User Plane connection of a PDU session. This is used for "AN Release" Procedure. |
nsmf_pdu_session |
| n2_request_ack |
Simulate the receipt of N2 Request ACK condition |
nsmf_pdu_session |
| n2_handover |
Performs an N2 Handover. This event must be triggered on the target AMF node. |
nsmf_pdu_session |
| xn_handover |
Performs an XN Handover. This event must be triggered on the target AMF node. |
nsmf_pdu_session |
| registration |
UE Mobility Registration |
nsmf_pdu_session |
| eps_5g_registration |
EPS to 5G Mobility Registration |
nsmf_pdu_session |
| eps_5g_handover |
EPS to 5G Handover |
nsmf_pdu_session |
| 5g_eps_handover |
5G to EPS Handover |
nsmf_pdu_session |
| reset_protocol |
Reset the protocol state machine |
nsmf_pdu_session |
| n1n2_msg_transfer |
The N1N2MessageTransfer service operation is used by a NF Service Consumer to transfer N1 and/or N2 information to the UE and/or 5G-AN through the AMF |
namf_comm |
| n1_msg_notify |
The N1MessageNotify service operation is used by an AMF notifying the N1 message received from the UE to a destination CN NF |
namf_comm |
| activate_user_plane |
Activate the User Plane connection of a PDU session. This is used for "Network Triggered Service Request" Procedure. |
namf_comm |
| n1n2_msg_transfer_fail |
The AMF uses this notification to inform the SMF that initiated an earlier N1N2MessageTransfer, that the AMF failed to deliver the N1 message to the UE as the UE
failed to respond to paging |
namf_comm |
| n2_info_notify |
This operation is invoked by the AMF, to notify a NF Service Consumer that subscribed N2 information has been received from access network. |
namf_comm |
| lpp_provide_capabilities |
Initiate an LPP Provide Capabilities Message |
namf_comm |
| lpp_request_assistance |
Initiate an LPP Request Assistance Message |
namf_comm |
| lpp_provide_location |
Initiate an LPP Provide Location Message |
namf_comm |
| n1n2_msg_subscribe |
Initiate an N1N2 Message Subscribe |
namf_comm |
| n1n2_msg_unsubscribe |
Initiate an N1N2 Message Unsubscribe |
namf_comm |
| non_ue_n2_info_subscribe |
Initiate an NonUeN2InfoSubscribe Message |
namf_comm |
| non_ue_n2_info_unsubscribe |
Initiate an NonUeN2InfoUnSubscribe Message |
namf_comm |
| warning_message_delivery |
Initiate a Warning Message using the NonUeN2MessageTransfer service operation to transfer N2 information to the 5G-AN through the AMF |
namf_comm |
| warning_message_cancel |
Initiate a Cancel Warning Message using the NonUeN2MessageTransfer service operation to transfer N2 information to the 5G-AN through the AMF |
namf_comm |
| reset_protocol |
Reset the protocol state machine |
namf_comm |
| determine_location |
The Nlmf_Location service enables an NF to request location determination (current geodetic and optionally civic location) for a target UE. |
nlmf_location |
| reset_protocol |
Reset the protocol state machine |
nlmf_location |
| identification |
Identification Request |
n26 |
| context |
Context Request/Response |
n26 |
| context_ack |
Context Ack |
n26 |
| fwd_reloc |
Forward Relocation Request |
n26 |
| fwd_reloc_cmpl |
Forward Relocation Complete Notification |
n26 |
| reloc_cncl |
Relocation Cancel Request |
n26 |
| handover |
Perform 5GS to EPS Handover |
n26 |
| register |
Register a network function with an NRF |
nnrf_nfm |
| update |
Update the registration of a network function with an NRF |
nnrf_nfm |
| deregister |
Deregister a network function with an NRF |
nnrf_nfm |
| activate |
The Activate service operation shall be used by the NF Service Consumer to activate SMS service for a given service user. |
nsmsf_sm_service |
| deactivate |
The Deactivate service operation shall be used by the NF Service Consumer to deactivate SMS service for a given service user. |
nsmsf_sm_service |
| send_sms |
Initiate MO SMS from the UE. |
nsmsf_sm_service |
| reset_protocol |
Reset the protocol state machine |
nsmsf_sm_service |
| reset_protocol |
Reset the protocol state machine |
namf_mt |
| registration |
This service operation shall be used by the NF Service Consumer to Retrieve the network slice information during the Registration procedure. |
nnssf_ns_selection |
| pdu_session_est |
This service operation shall be used by the NF Service Consumer to Retrieve the network slice information during the PDU Session Establishment procedure. |
nnssf_ns_selection |
| ue_config_update |
This service operation shall be used by the NF Service Consumer to Retrieve the network slice information during the UE Configuration Update procedure. |
nnssf_ns_selection |
| reset_protocol |
Reset the protocol state machine |
nnssf_ns_selection |
| create |
This service operation shall be used by an NF Service Consumer (e.g. AMF) to create the NSSAI Availability information of the NF |
nnssf_nssai_availability |
| update |
This service operation shall be used by the NF Service Consumer(e.g. AMF) to update the NSSAI Availability information of the NF. |
nnssf_nssai_availability |
| subscribe |
This service operation shall be used by the NF Service Consumer (e.g. AMF) to subscribe to a notification of any changes in status of the NSSAI availability information. |
nnssf_nssai_availability |
| unsubscribe |
This service operation shall be used by the NF Service Consumer(e.g. AMF) to unsubscribe to a notification of any previously subscribed changes to the NSSAI availability information. |
nnssf_nssai_availability |
| delete |
This service operation shall be used by the NF Service Consumer(e.g. AMF) to delete the NSSAI availability information stored for the NF service consumer in the NSSF. |
nnssf_nssai_availability |
| reset_protocol |
Reset the protocol state machine |
nnssf_nssai_availability |
| create |
Create operation shall be used to create an individual context. |
npcf_am_policy_control |
| update_loc_ch |
Update operation to indicate Location change (tracking area): the tracking area of the UE has changed. |
npcf_am_policy_control |
| update_pra_ch |
Update operation to indicate Change of UE presence in PRA: the UE is entering/leaving a Presence Reporting Area. |
npcf_am_policy_control |
| update_serv_area_ch |
Update operation to indicate Service Area Restriction change: the UDM notifies the AMF that the subscribed service area restriction information has changed. |
npcf_am_policy_control |
| update_rfsp_ch |
Update operation to indicate RFSP index change: the UDM notifies the AMF that the subscribed RFSP index has changed. |
npcf_am_policy_control |
| update_allowed_nssai_ch |
Update operation to indicate Allowed NSSAI change: the AMF notifies that the set of UE allowed S-NSSAIs has changed. |
npcf_am_policy_control |
| update_ue_ambr_ch |
Update operation to indicate UE-AMBR change: the UDM notifies the AMF that the subscribed UE-AMBR has changed. |
npcf_am_policy_control |
| update_smf_select_ch |
Update operation to indicate SMF selection information change: UE request for an unsupported DNN or UE request for a DNN within the list of DNN candidates for replacement per S-NSSAI. |
npcf_am_policy_control |
| access_type_ch |
Update operation to indicate Access Type change: the AMF notifies that the access type and the RAT type combinations available in the AMF for a UE with simultaneous 3GPP and non-3GPP connectivity has changed. |
npcf_am_policy_control |
| rg_tmbr_ch |
Update operation to indicate The Subscribed RG-TMBR change: the UDM notifies the AMF that the subscribed RG-TMBR has changed. |
npcf_am_policy_control |
| delete |
Delete operation shall be used to delete an individual context. |
npcf_am_policy_control |
| reset_protocol |
Reset the protocol state machine |
npcf_am_policy_control |
| create |
Create operation shall be used to create an individual context. |
npcf_ue_policy_control |
| update_loc_ch |
Update operation to indicate Location change (tracking area): the tracking area of the UE has changed. |
npcf_ue_policy_control |
| update_pra_ch |
Update operation to indicate Change of UE presence in PRA: the UE is entering/leaving a Presence Reporting Area. |
npcf_ue_policy_control |
| update_ue_policy |
Update operation to indicate UE Policy change. |
npcf_ue_policy_control |
| update_plmn_ch |
Update operation to indicate PLMN change: the UEF notifies that the set of UE allowed S-NSSAIs has changed. |
npcf_ue_policy_control |
| update_con_state_ch |
Update operation to indicate Connectivity state change: the connectivity state of UE has changed.. |
npcf_ue_policy_control |
| delete |
Delete operation shall be used to delete an individual context. |
npcf_ue_policy_control |
| reset_protocol |
Reset the protocol state machine |
npcf_ue_policy_control |
| check |
Initiate a Equipment Status request from the N5g EIR application |
n5g_eir |
| event_notify |
This service operation notifies the GMLC about a UE location related event information related to emergency sessions or deferred location, i.e. the initiation, handover or termination of an
emergency session or the completion or activation of deferred location. |
namf_location |
| reset_protocol |
Reset the protocol state machine |
namf_location |
| location_update |
This service operation enables the AMF to update UE location information towards the GMLC. |
ngmlc_location |
| reset_protocol |
Reset the protocol state machine |
ngmlc_location |
| notify |
The Notify service operation is invoked by the AMF, to send a notification, towards the notification URI, when certain event included in the subscription has taken place. |
namf_event_exposure |
| reset_protocol |
Reset the protocol state machine |
namf_event_exposure |
| none |
Stops the referenced node action. Note: Application (app::xxx) should never be used with event::none in a node-specific command. |
|