Event  <event> 

The XML tag name of an event supported by the selected Application
Uniquely identifies, when combined with Application, an application event. Compound events received on a node which sent it (i.e. the completion of the transaction)

Type:

  SmartEventReceivedTypes
RESTRICTIONS
DESCRIPTION
USED IN
delivery_status Initiate a Delivery Status from the C application c
routing_for_sms Initiate a Send Routing Info For SM from the C application c
send_routing Initiate a Send Routing Information from the C application c
alert_sc Initiate an Alert SC from the C application c
inform_sc Initiate an Inform SC from the C application c
init Initiate an initial Credit Control Request request for an idle transaction cc
update Initiate a Credit Control Update Request request for an active transaction cc
terminate Initiate a Credit Control Terminate Request request for an active transaction cc
debit Initiate a Direct Debit event cc
refund Initiate a Refund Account event cc
balance Initiate an Account Balance event cc
price Initiate a Price Enquiry cc
auth Initiate a ReAuth Request from the DCCA application cc
abort Initiate a Abort Session from the DCCA application cc
push Initiate a Push Profile Request cx
dereg Initiate a De-Registration (Registration Termination) Request cx
user_reg Initiate a I-CSCF User Authorization Request from the Cx application cx
auth Initiate a S-CSCF Multimedia Authorization Request from the Cx application. cx
reg_scscf Initiate a S-CSCF Registration (Server Assignment) Request from the Cx application cx
dereg_scscf Initiate a S-CSCF De-Registration (Server Assignment) Request from the Cx application cx
location Initiate a I-CSCF Location Query (Location-Info) Request from the Cx application cx
auth Initiate a Send Auth Info from the D application d
attach Initiate a Send Auth Info, followed by an Update Location from the D application d
restore Initiate a Restore from the D application d
auth_restore Initiate a Send Auth Info, followed by an Restore Data from the D application d
update Initiate a Update Location from the D application d
purge Initiate a Purge MS from the D application d
ready_for_sms Initiate a Ready For SMS from the D application d
failure_report Initiate an Authentication Failure Report d
cancel Initiate a Cancel Location d
insert Initiates a Insert Subscriber Data d
delete Initiates a Delete Subscriber d
reset Initiates a Reset Request. If a rate of 0 is provided (or no rate is configured), then the reset is considered as a HLR node reset, and no UE IDs are sent (i.e. all UEs related to this HLR). The reset event supports the peer_number additional information element d
roaming Initiates a Provide Roaming Number Request from the D application to the current registered location of the subscriber d
discover Initiate a DHCP negotiation dhcp
request Request an IP Lease in the DHCP negotiation dhcp
renew Renew a DHCP lease dhcp
rebind Rebind a DHCP lease dhcp
decline Decline a DHCP ack dhcp
release Release a DHCP lease dhcp
inform Inform a DHCP Server of certain parameters currently in use dhcp
lease_expire DHCP lease expired dhcp
v6_solicit Initiate a DHCP V6 Solicit message dhcp
v6_request Initiate a DHCP V6 Request message dhcp
v6_release Initiate a DHCP V6 Release message dhcp
offer Receive a DHCP Offer from a DHCP Server dhcp
ack Receive a DHCP Ack from a DHCP Server dhcp
v6_advertise Receive a DHCP V6 Advertise message dhcp
v6_reply Receive a DHCP V6 Reply message dhcp
query Initiate an DNS Query dns
validate_success Answer validation succeeded dns
validate_failed Answer validation failed dns
protocol_failed DNS Query failed dns
send_sms Initiate a MO Deliver SM from the E application e
send_sms Initiate an MT Forward SM from the E application e
send_cdr Generate a complete CDR from a subscriber ga
routing_for_gprs Initiate a Routing For GPRS request from the Gc application gc
failure_report Initiate a Failure Report from the Gc application gc
ready_for_gprs Initiate an Ready for GPRS indication from the Gc application gc
send_sms Initiate a MO Deliver SM from the Gd application gd
send_sms Initiate an MT Forward SM from the Gd application gd
pdp_establish Initiate a (Initial DP) GPRS Dialogue from the Ge application indicating a PDP Context Establishment occurred ge
charging_report Initiate an Apply Charging Report GPRS message from the Ge application ge
event_report_attach Initiate an Event Report GPRS message from the Ge application ge
event_report_attachChangeOfPosition Initiate an Event Report GPRS message from the Ge application ge
event_report_detached Initiate an Event Report GPRS message from the Ge application ge
event_report_pdpContextEstablishment Initiate an Event Report GPRS message from the Ge application ge
event_report_pdpContextEstablishmentAcknowledgement Initiate an Event Report GPRS message from the Ge application ge
event_report_disconnect Initiate an Event Report GPRS message from the Ge application ge
event_report_pdpContextChangeOfPosition Initiate an Event Report GPRS message from the Ge application ge
pdp_released Initiate an Entity Released GPRS message from the Ge application indicating a PDP Context disconnect occurred, which will result in the end of the Camel dialogue ge
activity_test Initiate an Activity Test GPRS message from the Ge application ge
apply_charging Initiate an Apply Charging GPRS message from the Ge application ge
cancel Initiate an Cancel GPRS message from the Ge application ge
connect Initiate an Connect GPRS message from the Ge application ge
continue Initiate an Continue GPRS message from the Ge application ge
furnish_charging Initiate an Funish Charging Information GPRS message from the Ge application ge
release_pdp Initiate an Release GPRS message from the Ge application indicating a PDP Context disconnect should occur ge
request_report Initiate an Request Report GPRS message from the Ge application ge
reset_timer Initiate an Reset Timer GPRS message from the Ge application ge
send_charging Initiate an Send Charging Information GPRS message from the Ge application ge
check Initiate a Check Equipment from the Gf application gf
send_routing_info Initiate a Routing Info from the J application j
any_time_interrogation Initiate a Any Time Interrogation from the J application j
any_time_subscription_interrogation Initiate a Any Time SubscriptionInterrogation from the J application j
any_time_modification Initiate a Any Time Modification from the J application j
unstructured_ss_request Initiate an Unstructured SS Request from the J application j
unstructured_ss_notify Initiate an Unstructured SS Notify from the J application j
note_subscriber_data_modified Initiate an Note Subscriber Data Modified from the J application j
process_unstructured_ss_request Initiate an Process Unstructured SS Request from the J application j
ss_invocation_notify Initiate an SS Invocation Notify from the J application j
delete_pdp Delete a PDP Context (without teardown bit) gn
delete_all_pdp Delete a PDP Context (with teardown bit) gn
update_pdp Update a PDP Context gn
init_pdp_act Update a PDP Context gn
create_primary Create a primary PDP Context gn
create_secondary Create a secondary PDP Context gn
sgsn_context Send SGSN Context request gn
auth Received Send Auth Info Result gr
purge Initiate a Purge Request gr
failure_report Initiate an Authentication Failure Report gr
update Initiate a Update GPRS Location gr
ready_for_sms Initiate a Ready For SMS from the Gr application gr
cancel Initiate a Cancel Location from the Gr application gr
insert Initiates a Insert Subscriber Data gr
delete Initiates a Delete Subscriber gr
reset Initiates a Reset Request. If a rate of 0 is provided (or no rate is configured), then the reset is considered as a HLR node reset, and no UE IDs are sent (i.e. all UEs related to this HLR). The reset event supports the peer_number additional information element gr
provide Initiates a Provide Subscriber Info Request from the Gr application to the current registered location of the subscriber gr
activate_trace Initiates a Activate Trace Mode Request from the Gr application to the current registered location of the subscriber gr
deactivate_trace Initiates a Deactivate Trace Mode Request from the Gr application to the current registered location of the subscriber gr
update Initiate a Location Update from the application gs
ms_activity Initiate a MS Activity from the Gs application gs
imsi_detach Initiate a IMSI Detach from the Gs application gs
gprs_detach Initiate a GPRS Detach from the Gs application gs
reset Initiate a Reset from the Gs application gs
alert Initiate an Alert from the Gs application gs
page Initiate a Page from the Gs application gs
mm_information Initiate a MM Information Request from the Gs application gs
start Start a transaction using the selected state flow gtp
send Force the sending of a message (specified by 'message') gtp
receive Indicate the receipt of a message (specified by 'message') gtp
timeout Trigger a timeout event on the state machine gtp
unsupported Indicate the receipt of an unsupported message. gtp
user_event1 *
user_event2 *
user_event3 *
user_event4 *
user_event5 *
user_event6 *
user_event7 *
user_event8 *
user_event9 *
user_event10 *
user_event11 *
user_event12 *
user_event13 *
user_event14 *
user_event15 *
user_event16 *
user_event17 *
user_event18 *
user_event19 *
user_event20 *
user_event21 *
user_event22 *
user_event23 *
user_event24 *
user_event25 *
user_event26 *
user_event27 *
user_event28 *
user_event29 *
user_event30 *
user_event31 *
user_event32 *
user_event33 *
user_event34 *
user_event35 *
user_event36 *
user_event37 *
user_event38 *
user_event39 *
user_event40 *
user_event41 *
user_event42 *
user_event43 *
user_event44 *
user_event45 *
user_event46 *
user_event47 *
user_event48 *
user_event49 *
user_event50 *
bearer_5_establish Indicates bearer establish event for bearer 5. gtp
bearer_6_establish Indicates bearer establish event for bearer 6. gtp
bearer_7_establish Indicates bearer establish event for bearer 7. gtp
bearer_8_establish Indicates bearer establish event for bearer 8. gtp
bearer_9_establish Indicates bearer establish event for bearer 9. gtp
bearer_10_establish Indicates bearer establish event for bearer 10. gtp
bearer_12_establish Indicates bearer establish event for bearer 12. gtp
bearer_13_establish Indicates bearer establish event for bearer 13. gtp
bearer_14_establish Indicates bearer establish event for bearer 14. gtp
bearer_15_establish Indicates bearer establish event for bearer 15. gtp
bearer_5_update Indicates bearer update event for bearer 5. gtp
bearer_6_update Indicates bearer update event for bearer 6. gtp
bearer_7_update Indicates bearer update event for bearer 7. gtp
bearer_8_update Indicates bearer update event for bearer 8. gtp
bearer_9_update Indicates bearer update event for bearer 9. gtp
bearer_10_update Indicates bearer update event for bearer 10. gtp
bearer_12_update Indicates bearer update event for bearer 12. gtp
bearer_13_update Indicates bearer update event for bearer 13. gtp
bearer_14_update Indicates bearer update event for bearer 14. gtp
bearer_15_update Indicates bearer update event for bearer 15. gtp
bearer_5_terminate Indicates bearer terminated event for bearer 5. gtp
bearer_6_terminate Indicates bearer terminated event for bearer 6. gtp
bearer_7_terminate Indicates bearer terminated event for bearer 7. gtp
bearer_8_terminate Indicates bearer terminated event for bearer 8. gtp
bearer_9_terminate Indicates bearer terminated event for bearer 9. gtp
bearer_10_terminate Indicates bearer terminated event for bearer 19. gtp
bearer_11_terminate Indicates bearer terminated event for bearer 11. gtp
bearer_12_terminate Indicates bearer terminated event for bearer 12. gtp
bearer_13_terminate Indicates bearer terminated event for bearer 13. gtp
bearer_14_terminate Indicates bearer terminated event for bearer 14. gtp
bearer_15_terminate Indicates bearer terminated event for bearer 15. gtp
packetfilter_threshold_exceeded Packet Filter Threshold Exceeded. gtp
init Initiate an initial Credit Control Request request for an idle transaction gx
update Initiate a Credit Control Update Request request for an active transaction gx
terminate Initiate a Credit Control Terminate Request request for an active transaction gx
abort Initiate a Abort Session Request for an active transaction gx
event_trigger Initiate an Event Trigger gx
sgsn_change Initiate SGSN_CHANGE Event Trigger gx
qos_change Initiate QOS_CHANGE Event Trigger gx
rat_change Initiate RAT_CHANGE Event Trigger gx
tft_change Initiate TFT_CHANGE Event Trigger gx
plmn_change Initiate PLMN_CHANGE Event Trigger gx
loss_of_bearer Initiate LOSS_OF_BEARER Event Trigger gx
recovery_of_bearer Initiate RECOVERY_OF_BEARER Event Trigger gx
ip_can_change Initiate IP_CAN_CHANGE Event Trigger gx
qos_change_exceeding_authorization Initiate QOS_CHANGE_EXCEEDING_AUTHORIZATION Event Trigger gx
rai_change Initiate RAI_CHANGE Event Trigger gx
user_location_change Initiate USER_LOCATION_CHANGE Event Trigger gx
no_event_triggers Initiate NO_EVENT_TRIGGERS Event Trigger gx
out_of_credit Initiate OUT_OF_CREDIT Event Trigger gx
reallocation_of_credit Initiate REALLOCATION_OF_CREDIT Event Trigger gx
revalidation_timeout Initiate REVALIDATION_TIMEOUT Event Trigger gx
ue_ip_address_allocate Initiate UE_IP_ADDRESS_ALLOCATE Event Trigger gx
ue_ip_address_release Initiate UE_IP_ADDRESS_RELEASE Event Trigger gx
default_eps_bearer_qos_change Initiate EPS_BEARER_QOS_CHANGE Event Trigger gx
an_gw_change Initiate AN_GW_CHANGE Event Trigger gx
successful_resource_allocation Initiate SUCCESSFUL_RESOURCE_ALLOCATION Event Trigger gx
resource_modification_request Initiate RESOURCE_MODIFICATION_REQUEST Event Trigger gx
pgw_trace_control Initiate PGW_TRACE_CONTROL Event Trigger gx
ue_time_zone_change Initiate UE_TIME_ZONE_CHANGE Event Trigger gx
tai_change Initiate TRIGGER_TAI_CHANGE Event Trigger gx
ecgi_change Initiate TRIGGER_ECGI_CHANGE Event Trigger gx
charging_correlation_exchange Initiate CHARGING_CORRELATION_EXCHANGE Event Trigger gx
apn_ambr_modification_failure Initiate APN_AMBR_MODIFICATION_FAILURE Event Trigger gx
user_csg_information_change Initiate USER_CSG_INFORMATION_CHANGE Event Trigger gx
usage_report Initiate USAGE_REPORT Event Trigger gx
default_eps_bearer_qos_modification_failure Initiate DEFAULT_EPS_BEARER_QOS_MODIFICATION_FAILURE Event Trigger gx
user_hybrid_subscribed_information_exchange Initiate USER_HYBRID_SUBSCRIBED_INFORMATION_EXCHANGE Event Trigger gx
user_csg_hybrid_unsubscribed_information_change Initiate USER_CSG_HYBRID_UNSUBSCRIBED_INFORMATION_CHANGE Event Trigger gx
routing_rule_change Initiate ROUTING_RULE_CHANGE Event Trigger gx
max_mbr_apn_ambr_change Initiate MAX_MBR_APN_AMBR_CHANGE Event Trigger gx
application_start Initiate APPLICATION_START Event Trigger gx
application_stop Initiate APPLICATION_STOP Event Trigger gx
adc_revalidation_timeout Initiate ADC_REVALIDATION_TIMEOUT Event Trigger gx
cs_to_ps_handover Initiate CS_TO_PS_HANDOVER Event Trigger gx
ue_local_ip_address_change Initiate UE_LOCAL_IP_ADDRESS_CHANGE Event Trigger gx
nb_local_ip_address_change Initiate NB_LOCAL_IP_ADDRESS_CHANGE Event Trigger gx
access_network_info_report Initiate ACCESS_NETWORK_INFO_REPORT Event Trigger gx
service_establish Initiate PCEF Indication of IP-CAN Service Establishment gx
service_modify Initiate PCEF Indication of IP-CAN Service Modification gx
service_terminate Initiate PCEF Indication of IP-CAN Service Termination gx
abort Initiate an Abort Session from the Gx application gx
update Initiate an RAR gx
reauth Initiate an RAR gx
terminate Initiate a Termination request from an active transaction gx
rule_install Initiate a rule install for an active transaction gx
rule_remove Initiate a rule remove for an active transaction gx
adc_rule_install Initiate an ADC rule install for an active transaction gx
adc_rule_remove Initiate an ADC rule remove for an active transaction gx
qos_change Initiate an event to update the Qos Information gx
usage_report_request Initiate a RAR to request a usage report. gx
init Initiate an Initial Request request from an idle transaction gxx
update Initiate an Update Request request from an active transaction gxx
terminate Initiate a Termination Request request from an active transaction gxx
event_trigger Initiate an Event Trigger gxx
sgsn_change Initiate SGSN_CHANGE Event Trigger gxx
qos_change Initiate QOS_CHANGE Event Trigger gxx
rat_change Initiate RAT_CHANGE Event Trigger gxx
tft_change Initiate TFT_CHANGE Event Trigger gxx
plmn_change Initiate PLMN_CHANGE Event Trigger gxx
loss_of_bearer Initiate LOSS_OF_BEARER Event Trigger gxx
recovery_of_bearer Initiate RECOVERY_OF_BEARER Event Trigger gxx
ip_can_change Initiate IP_CAN_CHANGE Event Trigger gxx
qos_change_exceeding_authorization Initiate QOS_CHANGE_EXCEEDING_AUTHORIZATION Event Trigger gxx
rai_change Initiate RAI_CHANGE Event Trigger gxx
user_location_change Initiate USER_LOCATION_CHANGE Event Trigger gxx
no_event_triggers Initiate NO_EVENT_TRIGGERS Event Trigger gxx
out_of_credit Initiate OUT_OF_CREDIT Event Trigger gxx
reallocation_of_credit Initiate REALLOCATION_OF_CREDIT Event Trigger gxx
revalidation_timeout Initiate REVALIDATION_TIMEOUT Event Trigger gxx
ue_ip_address_allocate Initiate UE_IP_ADDRESS_ALLOCATE Event Trigger gxx
ue_ip_address_release Initiate UE_IP_ADDRESS_RELEASE Event Trigger gxx
default_eps_bearer_qos_change Initiate EPS_BEARER_QOS_CHANGE Event Trigger gxx
an_gw_change Initiate AN_GW_CHANGE Event Trigger gxx
successful_resource_allocation Initiate SUCCESSFUL_RESOURCE_ALLOCATION Event Trigger gxx
resource_modification_request Initiate RESOURCE_MODIFICATION_REQUEST Event Trigger gxx
pgw_trace_control Initiate PGW_TRACE_CONTROL Event Trigger gxx
ue_time_zone_change Initiate UE_TIME_ZONE_CHANGE Event Trigger gxx
tai_change Initiate TRIGGER_TAI_CHANGE Event Trigger gxx
ecgi_change Initiate TRIGGER_ECGI_CHANGE Event Trigger gxx
charging_correlation_exchange Initiate CHARGING_CORRELATION_EXCHANGE Event Trigger gxx
apn_ambr_modification_failure Initiate APN_AMBR_MODIFICATION_FAILURE Event Trigger gxx
user_csg_information_change Initiate USER_CSG_INFORMATION_CHANGE Event Trigger gxx
usage_report Initiate USAGE_REPORT Event Trigger gxx
default_eps_bearer_qos_modification_failure Initiate DEFAULT_EPS_BEARER_QOS_MODIFICATION_FAILURE Event Trigger gxx
user_hybrid_subscribed_information_exchange Initiate USER_HYBRID_SUBSCRIBED_INFORMATION_EXCHANGE Event Trigger gxx
user_csg_hybrid_unsubscribed_information_change Initiate USER_CSG_HYBRID_UNSUBSCRIBED_INFORMATION_CHANGE Event Trigger gxx
routing_rule_change Initiate ROUTING_RULE_CHANGE Event Trigger gxx
max_mbr_apn_ambr_change Initiate MAX_MBR_APN_AMBR_CHANGE Event Trigger gxx
application_start Initiate APPLICATION_START Event Trigger gxx
application_stop Initiate APPLICATION_STOP Event Trigger gxx
adc_revalidation_timeout Initiate ADC_REVALIDATION_TIMEOUT Event Trigger gxx
cs_to_ps_handover Initiate CS_TO_PS_HANDOVER Event Trigger gxx
ue_local_ip_address_change Initiate UE_LOCAL_IP_ADDRESS_CHANGE Event Trigger gxx
nb_local_ip_address_change Initiate NB_LOCAL_IP_ADDRESS_CHANGE Event Trigger gxx
access_network_info_report Initiate ACCESS_NETWORK_INFO_REPORT Event Trigger gxx
service_establish BBERF Indication of IP-CAN Service Establishment or Resource Addition gxx
service_modify BBERF Indication of IP-CAN Service or Resource Modification gxx
service_terminate BBERF Indication of IP-CAN Service Termination or Service Deletion gxx
rule_install Initiate a rule install for an active transaction gxx
rule_remove Initiate a rule remove for an active transaction gxx
reset MBMS Reset m3
reset_all MBMS Reset All m3
update MBMS MCE Configuration Update m3
start MBMS Start m3
stop MBMS Stop m3
update MBMS Configuration Update m3
auth Initiate an authentication rad_3gpp
acct_start Initiate an Accounting Start rad_3gpp
acct_interim Initiate an Accounting Interim rad_3gpp
acct_stop Initiate an Accounting Stop rad_3gpp
disconnect Initiate a disconnect request. rad_3gpp
auth Initiate an authentication rad_aaa
acct_start Initiate an Accounting Start rad_aaa
acct_interim Initiate an Accounting Interim rad_aaa
acct_stop Initiate an Accounting Stop rad_aaa
attach UE Attach ranap
detach Mobile originating detach. This message is sent by the MS to request the release of a GMM context. See table 9.4.5.2/3GPP TS 24.008 ranap
update ranap
reset Reset parts of a Iu/RANAP Interface ranap
ue_iu_release_inactivity Enable the UTRAN to request the CN to release the Iu connection for a particular UE due to some UTRAN generated reason: OM Intervention, Unspecified Failure, User Inactivity, Repeated Integrity Checking Failure, Release due to UE generated signalling connection release, Radio Connection With UE Lost, Access Restricted Due to Shared Networks ranap
activate_primary_pdp Activate Primary PDP Context ranap
deactivate_pdp Deactivate PDP Context ranap
add_rule Adds a rule that could result in the creation of or the update of a dedicated bearer ranap
routing_area_update Routing area updating to update the registration of the actual routing area of an MS in the network ranap
handover Initiate a handover. ranap
service_request Initiate a Service Request ranap
csfb Intiates a Mobile Originated CSFB procedure. ranap
detach Mobile terminated detach. This message is sent by the network to request the release of a GMM context. See table 9.4.5.1/3GPP TS 24.008.. ranap
relocation_command Used to initiate a relocation command to a target RNC. This event is generally only used for coordinating a handover between Iu and S3. ranap
paging Initiate a Paging Request for a UE. ranap
ue_iu_release Generates an Iu Release Command to the RNC. ranap
information Initiate sending Information to the UE. Support for this message in a network is optional. ranap
identity Initiate sending Identity request to the UE.. ranap
ptmsi_relocation Initiate sending pTMSI relocation command to the UE.. ranap
auth Auth and Ciphering ranap
security_mode Security Mode ranap
queries_status_collection Initiate a Status Collection Query for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
queries_accessibility_status Initiate a Accessiblity Status Query for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
queries_roaming_status Initiate a Roaming Status Query for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
queries_connection_type Initiate a Connection Type Query for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
create_status_collection_subscription Initiate a Create Status Collection Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
create_accessibility_status_subscription Initiate a Create Accessibility Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
create_roaming_status_subscription Initiate a Create Roaming Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
create_connection_type_subscription Initiate a Create Connection Type Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
read_status_collection_subscription Initiate a Read Status Collection Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
read_accessibility_status_subscription Initiate a Read Accessibility Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
read_roaming_status_subscription Initiate a Read Roaming Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
read_connection_type_subscription Initiate a Read Connection Type Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
update_status_collection_subscription Initiate a Update Status Collection Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
update_accessibility_status_subscription Initiate a Update Accessibility Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
update_roaming_status_subscription Initiate a Update Roaming Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
update_connection_type_subscription Initiate a Update Connection Type Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
delete_status_collection_subscription Initiate a Delete Status Collection Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
delete_accessibility_status_subscription Initiate a Delete Accessibility Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
delete_roaming_status_subscription Initiate a Delete Roaming Status Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
delete_connection_type_subscription Initiate a Delete Connection Type Subscription request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
status_collection_change_notification Initiate a Status Collection Change Notification request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
accessibility_status_change_notification Initiate a Accessibility Status Change Notification request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
roaming_status_change_notification Initiate a Roaming Status Change Notification request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
access_status_change_subscr_cancel_notify Initiate a Accessibility Status Change Subscription Cancellation Notification request for a single Terminal Address via Terminal Status RESTfulApi application REST_TerminalStatus
read_inbound_message Initiate a Read Inbound Message request via Messaging RESTfulApi application REST_Messaging
delete_inbound_message Initiate a Delete Inbound Message request via Messaging RESTfulApi application REST_Messaging
read_delete_inbound_message Initiate a Read and Delete Inbound Message request via Messaging RESTfulApi application REST_Messaging
report_inbound_msg_status Initiate a Report Inbound Msg Status request via Messaging RESTfulApi application REST_Messaging
create_inbound_subscription Initiate a Create Inbound Subscription request via Messaging RESTfulApi application REST_Messaging
read_inbound_subscription Initiate a Read Inbound Subscription request via Messaging RESTfulApi application REST_Messaging
delete_inbound_subscription Initiate a Delete Inbound Subscription request via Messaging RESTfulApi application REST_Messaging
create_outbound_message Initiate a Create Outbound Message request via Messaging RESTfulApi application REST_Messaging
read_outbound_message_delivery_status Initiate a Read Outbound Message Delivery Status request via Messaging RESTfulApi application REST_Messaging
read_message_delivery_status Initiate a Read Message Delivery Status request via Messaging RESTfulApi application REST_Messaging
create_outbound_subscription Initiate a Create Outbound Subscription request via Messaging RESTfulApi application REST_Messaging
read_outbound_subscription Initiate a Read Outbound Subscription request via Messaging RESTfulApi application REST_Messaging
delete_outbound_subscription Initiate a Delete Outbound Subscription request via Messaging RESTfulApi application REST_Messaging
msg_arrival_notification Initiate a Msg Arrival Notification request via Messaging RESTfulApi application REST_Messaging
notify_outbound_message_delivery_status Initiate a Notify Outbound Message Delivery Status request via Messaging RESTfulApi application REST_Messaging
create_presence_source Initiate a Create Presence Source request via Presence RESTfulApi application REST_Presence
update_presence_source Initiate a Update Presence Source request via Presence RESTfulApi application REST_Presence
retrieve_presence_source Initiate a Retrieve Presence Source request via Presence RESTfulApi application REST_Presence
remove_presence_source Initiate a Remove Presence Source request via Presence RESTfulApi application REST_Presence
retrieve_content Initiate a Retrieve Content request via Presence RESTfulApi application REST_Presence
update_content Initiate a Update Content request via Presence RESTfulApi application REST_Presence
remove_content Initiate a Remove Content request via Presence RESTfulApi application REST_Presence
retrieve_watcher Initiate a Retrieve Watcher request via Presence RESTfulApi application REST_Presence
create_auth_rule Initiate a Create Authorization Rule request via Presence RESTfulApi application REST_Presence
update_auth_rule Initiate a Update Authorization Rule request via Presence RESTfulApi application REST_Presence
retrieve_auth_rule Initiate a Retrieve Authorization Rule request via Presence RESTfulApi application REST_Presence
remove_auth_rule Initiate a Remove Authorization Rule request via Presence RESTfulApi application REST_Presence
retrieve_presence_contact Initiate a Retrieve PresenceContact request via Presence RESTfulApi application REST_Presence
retrieve_presence_list Initiate a Retrieve Presence List request via Presence RESTfulApi application REST_Presence
retrieve_presence_contacts_content Initiate a Retrieve PresenceContact request via Presence RESTfulApi application REST_Presence
retrieve_subscr Initiate a Retrieve All Active Subscription request via Presence RESTfulApi application REST_Presence
create_watcher_subscr Initiate a Create Watcher Subscription request via Presence RESTfulApi application REST_Presence
update_watcher_subscr Initiate a Update Watcher Subscription request via Presence RESTfulApi application REST_Presence
retrieve_watcher_subscr Initiate a Retrieve Watcher Subscription request via Presence RESTfulApi application REST_Presence
terminate_watcher_subscr Initiate a Terminate Watcher Subscription request via Presence RESTfulApi application REST_Presence
create_presence_subscr Initiate a Create Presence Subscription request via Presence RESTfulApi application REST_Presence
update_presence_subscr Initiate a Update Presence Subscription request via Presence RESTfulApi application REST_Presence
retrieve_presence_subscr Initiate a Retrieve Presence Subscription request via Presence RESTfulApi application REST_Presence
terminate_presence_subscr Initiate a Terminate Presence Subscription request via Presence RESTfulApi application REST_Presence
create_presence_list_subscr Initiate a Create Presence List Subscription request via Presence RESTfulApi application REST_Presence
update_presence_list_subscr Initiate a Update Presence List Subscription request via Presence RESTfulApi application REST_Presence
retrieve_presence_list_subscr Initiate a Retrieve Presence List Subscription request via Presence RESTfulApi application REST_Presence
terminate_presence_list_subscr Initiate a Terminate Presence List Subscription request via Presence RESTfulApi application REST_Presence
retrieve_portrait_icon Initiate a Retrieve Portrait Icon request via Presence RESTfulApi application REST_Presence
update_portrait_icon Initiate a Update Portrait Icon request via Presence RESTfulApi application REST_Presence
remove_portrait_icon Initiate a Remove Portrait Icon request via Presence RESTfulApi application REST_Presence
retrieve_adhoc_presence_list Initiate a Retrieve Adhoc Presence List request via Presence RESTfulApi application REST_Presence
notify_watcher_subscr Initiate a Notify Watcher Subscription request via Presence RESTfulApi application REST_Presence
notify_presence_subscr Initiate a Notify Presence Subscription request via Presence RESTfulApi application REST_Presence
notify_presence_list_subscr Initiate a Notify Presence List Subscription request via Presence RESTfulApi application REST_Presence
start Initiate a Start on the SmartFlow for the RESTfulApi application rest
reset_protocol Reset the protocol state machine *
event Initiate a Event from the Rf application. rf
start Initiate an Accounting Start from the Rf application rf
interim Initiate an interim Accounting message from the Rf application rf
stop Initiate a Accounting Stop from the Rf application rf
abort Initiate a Abort Session rf
init Initiate an initial Credit Control Request request for an idle transaction ro
update Initiate a Credit Control Update Request request for an active transaction ro
terminate Initiate a Credit Control Terminate Request request for an active transaction ro
debit Initiate a Direct Debit event ro
refund Initiate a Refund Account event ro
balance Initiate an Account Balance event ro
price Initiate a Price Enquiry ro
auth Initiate a ReAuth Request from the Ro application ro
abort Initiate a Abort Session from the Ro application ro
final_unit_indication Initiates that a Final-Unit-Indication has been sent. ro
auth Initiate an initial AA-Request (AAR) Message. rx
auth_preliminary Initiate an initial AA-Request (AAR) Message. rx
auth_final Initiate an initial AA-Request (AAR) Message. rx
update Initiate an authorization request on the Rx interface for a currently active session. rx
terminate Initiate a Session-Termination-Request (STR) command. rx
abort Initiate an Abort Session from the Rx application. Initiate an IP-CAN Session Termination on Rx rx
charging_correlation_exchange Initiate a Charing Correlation Exchange Notification rx
loss_of_bearer Initiate a Loss of Bearer Notification rx
recovery_of_bearer Initiate a Recovery of Bearer Notification rx
release_of_bearer Initiate a Release of Bearer Notification rx
ip_can_type_change Initiate an IP-CAN Type Change Notification rx
out_of_credit Initiate an Out of Credit Notification rx
successful_resources_allocation Initiate a Successful Resources Allocation Notification rx
failed_resources_allocation Initiate a Failed Resources Allocation Notification rx
limited_pcc_deployment Initiate a Limited PCC Deployment Notification rx
usage_report Initiate a Usage Report Notification rx
access_network_info_report Initiate an Access Network Info Report Notification rx
recovery_from_limited_pcc_deployment Initiate a Recovery From Limited PCC Deployment Notification rx
db_check Initiate a Binding DB check on the Rxb interface for a subscriber. rx
attach UE Attach s1
attach_without_pdn UE Attach Without PDN s1
detach UE Detach s1
tau Tracking Area Update (TAU) s1
service_request UE Service Request s1
cp_service_request UE Control Plane Service Request s1
ue_context_release_inactivity Initiate a UE Context Release due to user inactivity. s1
ue_context_release_radio_lost Initiate a UE Context Release due to Radio Connection With UE Lost. s1
ue_context_release_eutran_reason Initiate a UE Context Release due to E-UTRAN Generated Reason. s1
ue_context_release_misc_unspecified Initiate a UE Context Release due to misc unspecified reason. s1
ue_context_release_protocol_unspecified Initiate a UE Context Release due to protocol unspecified reason. s1
ue_context_release_radio_unspecified Initiate a UE Context Release due to radio unspecified reason. s1
ue_context_release_transport_unspecified Initiate a UE Context Release due to transport unspecified reason. s1
ue_context_release_load_balancing_tau_required Initiate a UE Context Release due to load balancing TAU required. s1
ue_context_release_cs_fallback Initiate a UE Context Release due to CS Fallback. s1
create_pdn Performs a PDN connectivity request. s1
delete_pdn Performs a PDN disconnect request. s1
create_dedicated Requests a UE initiated Dedicated Bearer. s1
delete_dedicated_enb Requests an eNB initiated Dedicated Bearer Delete. s1
handover Performs a handover. s1
x2_handover Performs an X2 handover. s1
redirect Performs an Redirection. s1
send_sms Sends an SMS message from the UE. s1
enb_configuration_transfer Sends an eNB Configuration Transfer to the MME. s1
enb_configuration_update Sends an eNB Configuration Update to the MME. s1
enb_direct_information_transfer Sends an eNB Direct Information Transfer to the MME. s1
cell_traffic_trace Sends a Cell Traffic Trace Message to the MME. s1
context_suspend Sends a UE Context Suspend Request to the MME. s1
context_resume Sends a UE Context Resume Request to the MME. s1
secondary_node_addition Intiates a secondary node addition procedure. s1
secondary_node_release Intiates a secondary node release procedure. s1
location_report Sends a Location Report message to the MME. s1
lpp_provide_capabilities Sends an LPP Provide Capabilities message to the MME. s1
lpp_request_assistance Sends an LPP Request Assistance message to the MME. s1
lpp_provide_location Sends an LPP Provide Location message to the MME. s1
lppa_request_location Sends an LPPa Request Location message to the MME. s1
secondary_rat_report Sends a Secondary RAT Report message to the MME. s1
qos_mod Sends a Bearer Resource Modification Request message to the MME. s1
csfb Sends an Extended Service Request Message requesting CSFB to the MME. s1
initial_context_setup_failure Sends an Initial Context Setup Failure Message the MME. This would generally only be done if the received Initial Context Setup Request was capatured. This is generally only performed for doing negative testing and will cause unpredicatble behvaior within the UE/gNB s1
reset Reset parts of a S1 Interface s1
reset_all Reset all of a S1 Interface s1
reroute_nas_request Indicates that a Reroute NAS request message was received. s1
auth Indicates that a Auth Request message has been received. This event is generally used to delay the Auth Response message. s1
security_mode Indicates that a Security Mode Command has been received. This event is generally used to delay the Security Mode Complete response message. s1
attach_accept Indicates that an Attach Accept message has been received. This event is generally used to delay the Attach Complete response message. s1
initial_context_setup_request Indicates that an S1AP Initial Context Setup Request message has been received. This event is generally used to delay the Initial Context Setup Response message. s1
attach_without_pdn Initiate an UE Attach Without PDN. s1
detach Initiate an MME Initiated Deatech Request for a UE. s1
paging Initiate a PS Paging Request for a UE. s1
paging_cs Initiate a CS Paging Request for a UE. s1
ue_context_release Initiate a Paging Request for a UE. s1
add_rule Adds a rule that could result in the creation of or the update of a dedicated bearer s1
create_default Create a default bearer s1
delete_default Delete a default bearer s1
delete_default_insufficient_resources Delete a default bearer with an ESM cause #26 (Insufficient Resources) s1
delete_dedicated Requests a network initiated delete Dedicated Bearer. s1
emm_information Initiate an EMM Information Request to a UE. s1
guti_realloc Initiate a GUTI Reallocation procedure to a UE. s1
handover_command Signals the completion of a handover. This event is used to notify the MME to complete the handover procedure with the source eNB node. This is used to coordinate the handover with non eNB nodes like an S3 handover to an RNC. s1
lpp_request_capabilities Initiate a Request Capabilities Message from the S1/LPP application s1
lpp_provide_assistance Initiate a Provide Assistance Message from the S1/LPP application s1
lpp_request_location Initiate a Request Location Data Message from the S1/LPP application s1
lpp_request_location_agnss Initiate an LPP Request Location Message with a request for a-gnss data. s1
lpp_request_location_otdoa Initiate an LPP Request Location Message with a request for OTDOA data. s1
lpp_request_location_ecid Initiate an LPP Request Location Message with a request for E-CID data. s1
lppa_request_location Initiate a Request Location Data Message from the S1/LPP/LPPa application s1
lppa_request_location_otdoa Initiate a Request Location OTDOA Data Message from the S1/LPP/LPPa application s1
send_sms Sends and SMS message from the network to UE. s1
mme_configuration_transfer Sends an MME Configuration Transfer to the eNB. s1
mme_configuration_update Sends an MME Configuration Update to the eNB. s1
mme_direct_information_transfer Sends an MME Direct Information Transfer to the eNB. s1
cs_service_notification Sends a CS Service Notification message to the eNB. s1
attach_reject_congestion Can be used to issue an Attach Reject message to the eNB with timer value t3346 to indicate that congestion is occuring. This event can only be used when the attach request has been captured. s1
service_reject_congestion Can be used to issue a Service Reject message to the eNB with timer value t3346 to indicate that congestion is occuring. This event can only be used when the service request has been captured. s1
tau_reject_congestion Can be used to issue a TAU Reject message to the eNB with timer value t3346 to indicate that congestion is occuring. This event can only be used when the TAU has been captured. s1
location_reporting_control Sends a Location Reporting Control message to the eNB. s1
esm_information_request Sends an ESM Information Request message to the eNB. s1
trace_start Sends an Trace Start message to the eNB. s1
deactivate_trace Sends a Deactivate Trace to the eNB. s1
write_replace_warning Sends a Write-Replace Warning message to the eNB. s1
identification_req Sends an Identification Request to the eNB. s1
ue_radio_capability_match Sends an UE Radio Capability Match to the eNB. s1
kill Sends an Kill Message to the eNB. s1
attach_request Indicates that an Attach Request message has been received. This event is typically used to prevent or delay the remaining attach sequence from occuring. s1
auth Indicates that a Auth message exchange has completed. This event is typically used to prevent or delay the remaining attach sequence from occuring. s1
security_mode Indicates that a Security Mode exchange has completed. This event is typically used to prevent or delay the remaining attach sequence from occuring. s1
registration UE Registration n2
deregistration UE De-Registration n2
pdu_session_establish PDU Session Establishment n2
pdu_session_release PDU Session Release n2
handover Performs an N2 Handover. This event must be triggered on the target gNB node. n2
xn_handover Performs an Xn Handover. This event must be triggered on the target gNB node. n2
ue_context_release_request_user_inactivity Initiates a UE Context Release Request due to User Inactivity n2
ue_context_release_request_ims_fallback Initiates a UE Context Release Request due to IMS voice EPS fallback or RAT fallback triggered n2
ue_context_release_command_successful_handover Initiates a UE Context Release Command from the Server due to Successful Handover n2
service_request Initiates a Service Request n2
service_request_emergency Initiates a Service Request for Emergency n2
service_request_emergency_fallback Initiates a Service Request for Emergency Fallback n2
add_rule Initiates adding a predefined rule. n2
qos_mod Initiates modification of qos parameters for a QoS Rule. n2
delete_rule Initiates removal of a QoS Rule. n2
ue_radio_capability_info_indication Initiate a UE Radio Capability Info Indication Check. n2
ran_configuration_update Sends an RAN Configuration Update to the AMF. n2
send_sms Sends an SMS message from the UE over N2. n2
ran_configuration_transfer Sends an RAN Configuration Transfer message from the gNB over N2 to the AMF. n2
cell_traffic_trace Sends an Cell Traffic Trace from the gNB over N2 to the AMF. n2
trace_failure_indication Sends an Trace Failure Indication from the gNB over N2 to the AMF. n2
lpp_provide_capabilities Sends an LPP Provide Capabilities message toward the AMF. n2
lpp_request_assistance Sends an LPP Request Assistance message toward the AMF. n2
lpp_provide_location Sends an LPP Provide Location message toward the AMF. n2
reset Resets the current transaction by sending an NG Reset message from the gNB. n2
reset_all Perform an NG Reset with Reset All from the gNB. n2
pdu_session_modification Indicates that a PDU Session Modification Command was received. n2
authentication Indicates that a Authentication Request message has been received. This event is generally used to delay the Auth Response message. n2
security_mode Indicates that a Security Mode Command has been received. This event is generally used to delay the Security Mode Complete response message. n2
identity_request Indicates that a Identity Request has been received. This event is generally used to delay the Identity Response message. n2
reroute Initiate AMF reroute for a UE registration request. n2
paging Initiate a Paging Request to a UE. n2
ue_radio_capability_check Initiate a UE Radio Capability Check. n2
add_rule Adds a rule that could result in the creation of or the update of a new QoS Flow n2
delete_rule Deletes a rule that could result in the deletion of or the update of a QoS Flow n2
guti_realloc Initiate a GUTI Reallocation procedure to a UE. n2
send_sms Sends an SMS message from the network to UE over N2. n2
amf_configuration_update Sends an AMF Configuration Update to the gNB. n2
tnla_actions Sends an AMF Configuration Update with one or more TNLA actions (add, modify, delete). This action needs to be accompanied by 1 or more n2_tnla_action configuration parameters to provide details about the action(s) requested. n2
ue_tnla_binding_release Sends a UE-TNLA Binding Release from the AMF. n2
ran_configuration_transfer Sends an RAN Configuration Transfer message from the AMF over N2 to the gNB. n2
ue_context_modification_request Sends a UE Context Modification Request from the AMF. n2
trace_start Sends a Trace Start from the AMF. n2
deactivate_trace Sends a Deactivate Trace from the AMF. n2
lpp_request_capabilities Initiate a Request Capabilities Message to the UE n2
lpp_provide_assistance Initiate a Provide Assistance Message to the UE. n2
lpp_request_location Initiate a Request Location Data Message to the UE. n2
lpp_request_location_agnss Initiate an LPP Request Location Message with a request for a-gnss data. n2
lpp_request_location_otdoa Initiate an LPP Request Location Message with a request for OTDOA data. n2
lpp_request_location_ecid Initiate an LPP Request Location Message with a request for E-CID data. n2
reset Resets the current transaction by sending an NG Reset message from the AMF. n2
registration_request Indicates that an Registration Request message has been received. This event is typically used to prevent or delay the remaining registration sequence from occuring. n2
registration_accept Indicates that an Registration Accept message has been received. This event is typically used to prevent or delay the remaining registration sequence from occuring. n2
authentication Indicates that a Auth message exchange has completed. This event is typically used to prevent or delay the remaining attach sequence from occuring. n2
security_mode Indicates that a Security Mode exchange has completed. This event is typically used to prevent or delay the remaining attach sequence from occuring. n2
establish Establish a Session n4
delete Delete a Session n4
report Send a session report request n4
add_rule Adds a rule that could result in the creation of or the update of a PDR n4
update_pdr Used to modify a PDR. n4
update_far Used to modify a FAR. n4
update_qer Used to modify a QER. n4
update_urr Used to modify a URR. n4
update_bar Used to modify a BAR. n4
delete_rule Deletes a rule that could result in the deletion of a PDR n4
delete Delete Session n4
report Session Report Response n4
add_rule Add a Rule n4
delete_rule Delete a Rule n4
data_notification Sends a data notification message toward the SMF. n4
add_rule Received a Session Modification Request with a new rule. n4
delete_rule Received a Session Modification Request with a delete rule. n4
create_default Create a default bearer s2a
delete_default Delete a default bearer s2a
create_dedicated Create a dedicated bearer s2a
update_dedicated Update a dedicated bearer s2a
delete_dedicated Delete a dedicated bearer s2a
modify_bearer_command HSS initiated QOS modification s2a
change_notification Notify network of Location Change s2a
update_dedicated Update a bearer s2a
change_notification Change Notification completed s2a
create_default Create a default bearer s2b
delete_default Delete a default bearer s2b
create_dedicated Create a dedicated bearer s2b
update_dedicated Update a dedicated bearer s2b
delete_dedicated Delete a dedicated bearer s2b
modify_bearer Modify some/all bearers. Typically the result of a handover. s2b
modify_bearer_command HSS initiated QOS modification s2b
change_notification Notify network of Location Change s2b
update_dedicated Update a bearer s2b
handover Perform Handover with relocation s2b
change_notification Change Notification completed s2b
identification Identification Request s3
context Context Request s3
fwd_reloc Forward Relocation Request s3
fwd_reloc_cmpl Forward Relocation Complete Notification s3
reloc_cncl Relocation Cancel Request s3
detach Detach Notification s3
paging_ind CS Paging Indication s3
alert_mme_notif Alert MME Notification s3
alert_mme_ack Alert MME Acknowledge s3
ue_activity_notif UE Activity Notification s3
ue_activity_ack UE Activity Acknowledge s3
isr_status_indication ISR Status Indication s3
suspend_notif Suspend Notification s3
suspend_ack Suspend Acknowledge s3
identification Identification Request n26
context Context Request/Response n26
context_ack Context Ack n26
fwd_reloc Forward Relocation Request n26
fwd_reloc_cmpl Forward Relocation Complete Notification n26
reloc_cncl Relocation Cancel Request n26
handover Perform 5GS to EPS Handover n26
ps_to_cs_request PS_TO_CS Request sv
ps_to_cs_response PS_TO_CS Response sv
ps_to_cs_complete_notification PS_TO_CS_Complete Notification sv
ps_to_cs_complete_acknowledge PS_TO_CS_Complete Acknowledge sv
ps_to_cs_cancel_notification PS_TO_CS_Cancel Notification sv
ps_to_cs_cancel_acknowledge PS_TO_CS_Cancel Acknowledge sv
cs_to_ps_request CS_TO_PS Request sv
cs_to_ps_response CS_TO_PS Response sv
cs_to_ps_complete_notification CS_TO_PS_Complete Notification sv
cs_to_ps_complete_acknowledge CS_TO_PS_Complete Acknowledge sv
cs_to_ps_cancel_notification CS_TO_PS_Cancel Notification sv
cs_to_ps_cancel_acknowledge CS_TO_PS_Cancel Acknowledge sv
create_default Create a default bearer s4
delete_default Delete a default bearer s4
add_rule Adds a rule that could result in the creation of or the update of a dedicated bearer s4
qos_mod HSS initiated QOS modification s4
release_bearers Releases Access Bearers without taking the session down. s4
delete_dedicated Delete a dedicated bearer s4
change_notification Notify network of Location Change s4
create_default Create a default bearer s5
delete_default Delete a default bearer s5
create_dedicated Create a dedicated bearer s5
update_dedicated Update a dedicated bearer s5
delete_dedicated Delete a dedicated bearer s5
modify_bearer Modify some/all bearers. Typically the result of a handover. s5
modify_bearer_command HSS initiated QOS modification s5
change_notification Notify network of Location Change s5
remote_ue_connect Initiate sending of Remore UE REport Notification w/ Connect indication s5
remote_ue_disconnect Initiate sending of Remore UE REport Notification w/ Disconnect indication s5
update_dedicated Update a bearer s5
handover_sgw Perform Handover with SGW relocation s5
change_notification Change Notification completed s5
pgw_downlink_trigger Send PGW Downlink Triggering notification for current session. s5
cancel Received a Cancel Location Request s6
insert Received a Insert Subscriber Data Request s6
reset Received a Reset Request for a specific subscriber. s6
delete Received a Delete Subscriber Request to the current registered location s6
auth_resync Received a Send Auth Info from the Gr/S6 application, requiring Resync s6
attach Initiate a Send Auth Info, followed by a Update GPRS Location from the Gr/S6 application s6
attach_notify Initiate an Attach, followed by an Notify Request from the S6 application s6
auth Initiate a Send Auth Info from the Gr/S6 application s6
purge Initiate a Purge Request from the Gr/S6 application s6
notify Initiate a Notify Request from the S6 application. The notify_type element may be used to specific further specifics about the notify s6
update Initiate a Location Update from the application s6
auth Initiate an authentication, while idle (Using EAP/DER) s6b
auth_cont Continuation of authentication (only for delayed response and SmartAVP) s6b
authorize Initiate an authorization, while idle (Using AAR) s6b
reauth Initiate an (re)authentication, while not idle s6b
reauthorize Initiate an (re)authorization, while not idle s6b
detach Initiate a detach from the network s6b
reauth Initiate a re-authentication from the S6b application s6b
reauthorize Initiate a re-authorization from the S6b application s6b
detach Initiate an abort-termination from the S6b application s6b
abort Initiate a network initiated session abort without the need for a separate termination from the S6b application s6b
subscriber_info_retrieve Initiate a Subscriber Information Retrieval Request via S6m application s6m
s6m
subscriber_info_retrieve Initiate a Subscriber Information Retrieval Request via S6n application s6n
s6n
init Initiate an Initial Credit Control Request Message from the V-PCRF s9
event_trigger V-PCRF Initiated Event Trigger s9
sgsn_change V-PCRF Initiated SGSN_CHANGE Event Trigger s9
qos_change V-PCRF Initiated QOS_CHANGE Event Trigger s9
rat_change V-PCRF Initiated RAT_CHANGE Event Trigger s9
tft_change V-PCRF Initiated TFT_CHANGE Event Trigger s9
plmn_change V-PCRF Initiated PLMN_CHANGE Event Trigger s9
loss_of_bearer V-PCRF Initiated LOSS_OF_BEARER Event Trigger s9
recovery_of_bearer V-PCRF Initiated RECOVERY_OF_BEARER Event Trigger s9
ip_can_change V-PCRF Initiated IP_CAN_CHANGE Event Trigger s9
qos_change_exceeding_authorization V-PCRF Initiated QOS_CHANGE_EXCEEDING_AUTHORIZATION Event Trigger s9
rai_change V-PCRF Initiated RAI_CHANGE Event Trigger s9
user_location_change V-PCRF Initiated USER_LOCATION_CHANGE Event Trigger s9
no_event_triggers V-PCRF Initiated NO_EVENT_TRIGGERS Event Trigger s9
out_of_credit V-PCRF Initiated OUT_OF_CREDIT Event Trigger s9
reallocation_of_credit V-PCRF Initiated REALLOCATION_OF_CREDIT Event Trigger s9
revalidation_timeout V-PCRF Initiated REVALIDATION_TIMEOUT Event Trigger s9
ue_ip_address_allocate V-PCRF Initiated UE_IP_ADDRESS_ALLOCATE Event Trigger s9
ue_ip_address_release V-PCRF Initiated UE_IP_ADDRESS_RELEASE Event Trigger s9
default_eps_bearer_qos_change V-PCRF Initiated EPS_BEARER_QOS_CHANGE Event Trigger s9
an_gw_change V-PCRF Initiated AN_GW_CHANGE Event Trigger s9
successful_resource_allocation V-PCRF Initiated SUCCESSFUL_RESOURCE_ALLOCATION Event Trigger s9
resource_modification_request V-PCRF Initiated RESOURCE_MODIFICATION_REQUEST Event Trigger s9
pgw_trace_control V-PCRF Initiated PGW_TRACE_CONTROL Event Trigger s9
ue_time_zone_change V-PCRF Initiated UE_TIME_ZONE_CHANGE Event Trigger s9
tai_change V-PCRF Initiated TRIGGER_TAI_CHANGE Event Trigger s9
ecgi_change V-PCRF Initiated TRIGGER_ECGI_CHANGE Event Trigger s9
charging_correlation_exchange V-PCRF Initiated CHARGING_CORRELATION_EXCHANGE Event Trigger s9
apn_ambr_modification_failure V-PCRF Initiated APN_AMBR_MODIFICATION_FAILURE Event Trigger s9
user_csg_information_change V-PCRF Initiated USER_CSG_INFORMATION_CHANGE Event Trigger s9
usage_report V-PCRF Initiated USAGE_REPORT Event Trigger s9
default_eps_bearer_qos_modification_failure V-PCRF Initiated DEFAULT_EPS_BEARER_QOS_MODIFICATION_FAILURE Event Trigger s9
user_hybrid_subscribed_information_exchange V-PCRF Initiated USER_HYBRID_SUBSCRIBED_INFORMATION_EXCHANGE Event Trigger s9
user_csg_hybrid_unsubscribed_information_change V-PCRF Initiated USER_CSG_HYBRID_UNSUBSCRIBED_INFORMATION_CHANGE Event Trigger s9
routing_rule_change V-PCRF Initiated ROUTING_RULE_CHANGE Event Trigger s9
max_mbr_apn_ambr_change V-PCRF Initiated MAX_MBR_APN_AMBR_CHANGE Event Trigger s9
application_start V-PCRF Initiated APPLICATION_START Event Trigger s9
application_stop V-PCRF Initiated APPLICATION_STOP Event Trigger s9
adc_revalidation_timeout V-PCRF Initiated ADC_REVALIDATION_TIMEOUT Event Trigger s9
cs_to_ps_handover V-PCRF Initiated CS_TO_PS_HANDOVER Event Trigger s9
ue_local_ip_address_change V-PCRF Initiated UE_LOCAL_IP_ADDRESS_CHANGE Event Trigger s9
nb_local_ip_address_change V-PCRF Initiated NB_LOCAL_IP_ADDRESS_CHANGE Event Trigger s9
access_network_info_report V-PCRF Initiated ACCESS_NETWORK_INFO_REPORT Event Trigger s9
service_establish V-PCRF Indication of IP-CAN Service Establishment or Resource Addition s9
service_modify V-PCRF Indication of IP-CAN Service or Resource Modification s9
service_terminate V-PCRF Indication of IP-CAN Service Termination or Resource Deletion s9
trigger_establishment_request Sent by the H-PCRF to the V-PCRF in order to trigger the S9 Session Establishment. s9
update Initiate an RAR s9
reauth Initiate an RAR s9
terminate Initiate an RAR to terminate IP-CAN Session s9
rule_install Initiate a rule install for an active transaction s9
rule_remove Initiate a rule remove for an active transaction s9
adc_rule_install Initiate an ADC rule install for an active transaction s9
adc_rule_remove Initiate an ADC rule remove for an active transaction s9
create_default Create a default bearer s11
delete_default Delete a default bearer s11
create_dedicated Create a dedicated bearer s11
update_dedicated Update a dedicated bearer s11
delete_dedicated Delete a dedicated bearer s11
sgw_relocation Session underwent SGW relocation s11
release_bearers Releases Access Bearers without taking the session down. s11
modify_bearer Modify some/all bearers. Typically the result of create_default or candover. s11
modify_bearer_command HSS initiated QOS modification s11
notify_downlink_data Notify Downlink session of data needing to be sent. s11
change_notification Notify network of Location Change s11
remote_ue_connect Initiate sending of Remote UE Report Notification with Connect indication s11
remote_ue_disconnect Initiate sending of Remote UE Report Notification with Disconnect indication s11
x2_handover_enodeb Perform UE Handover s11
x2_handover_sgw Perform X2 based UE Handover with SGW relocation s11
s1_handover_sgw Perform S1 based UE Handover with SGW relocation s11
s1_handover_mme Perform S1 based UE Handover with MME relocation s11
create_indirect_tunnel Initiate sending of Create Indirect Tunnel Request s11
delete_indirect_tunnel Initiate sending of Delete Indirect Tunnel Request s11
pgw_downlink_trigger Send PGW Downlink Triggering notification for current session. s11
check Initiate a Check Equipment from the S13 application s13
check Initiate a Equipment Status request from the N5g EIR application n5g_eir
init Initiate an initial request sd
terminate Initiate a Termination request from an active transaction sd
reauth Initiate a generic ReAuth request from an active transaction sd
adc_rule_install Initiate an ADC rule install for an active transaction sd
adc_rule_remove Initiate an ADC rule remove for an active transaction sd
usage_report_request Initiate a RAR to request a usage report. sd
update Initiate a update request from an active transaction sd
application_start Initiate APPLICATION_START Event Trigger sd
application_stop Initiate APPLICATION_STOP Event Trigger sd
no_event_triggers Initiate NO_EVENT_TRIGGERS Event Trigger sd
reallocation_of_credit Initiate REALLOCATION_OF_CREDIT Event Trigger sd
usage_report Initiate a Usage Report Notification sd
revalidation_timeout Initiate REVALIDATION_TIMEOUT Event Trigger sd
event_trigger Initiate an Event Trigger sd
terminate_req_rcvd Indicates that an RAR-T has been received. This will result in the TDF initating a CCR-T to the PCRF. The event is intended to allow the user to increase the delay between the sending of the RAA-T and CCR-T. sd
update Initiate a Update Location Request from the SGs application sgs
ue_activity Initiate a UE Activity from the SGs application sgs
imsi_detach Initiate a IMSI Detach from the SGs application sgs
eps_detach Initiate a EPS Detach from the SGs application sgs
send_sms Initiate a MO Deliver SM from the SGs application sgs
service_request Initiate a Service Request the SGs application sgs
csfb_indication Initiate a MO CSFB Indication the SGs application sgs
reset Initiate a Reset from the SGs application sgs
alert Initiate an Alert from the SGs application sgs
page Initiate a Page from the SGs application, with the service indication set to SMS sgs
page_cs Initiate a Page from the SGs application, with the service indication set to CS sgs
send_sms Initiate a MT Deliver SM from the SGs application sgs
service_abort Initiate a Service Abort Request from the SGs application sgs
mm_information Initiate a MM Information Request from the SGs application sgs
pull Initiate a Data Read (User Data) Request from the Sh application sh
update Initiate a Data Update (Profile Update) Request from the Sh application sh
subscribe_send_data Initiate a Subscribe Notifications Request from the Sh application, with the Send-Data-Indication sh
subscribe_no_data Initiate a Subscribe Notifications Request from the Sh application, without the Send-Data-Indication sh
unsubscribe Initiate a (un)Subscribe Notifications Request from the Sh application sh
notify Initiate a Notify (Push Notification) Request sh
location_report Initiate a Location Report Request slg
provide_location Initiate a Provide Location Request SLg application slg
establish Establish a Session sxa
delete Delete a Session sxa
add_rule Received a Session Modification Request with a new rule. sxa
update_pdr Used to modify a PDR. sxa
update_far Used to modify a FAR. sxa
update_qer Used to modify a QER. sxa
update_urr Used to modify a URR. sxa
update_bar Used to modify a BAR. sxa
delete_rule Received a Session Modification Request with a delete rule. sxa
delete Delete Session sxa
report Session Report Response sxa
add_rule Add a Rule sxa
delete_rule Delete a Rule sxa
establish Establish a Session sxb
delete Delete a Session sxb
add_rule Received a Session Modification Request with a new rule. sxb
update_pdr Used to modify a PDR. sxb
update_far Used to modify a FAR. sxb
update_qer Used to modify a QER. sxb
update_urr Used to modify a URR. sxb
update_bar Used to modify a BAR. sxb
delete_rule Received a Session Modification Request with a delete rule. sxb
delete Delete Session sxb
report Session Report Response sxb
add_rule Add a Rule sxb
delete_rule Delete a Rule sxb
establish Establish a Session sxc
delete Delete a Session sxc
add_rule Received a Session Modification Request with a new rule. sxc
update_pdr Used to modify a PDR. sxc
update_far Used to modify a FAR. sxc
update_qer Used to modify a QER. sxc
update_urr Used to modify a URR. sxc
update_bar Used to modify a BAR. sxc
delete_rule Received a Session Modification Request with a delete rule. sxc
delete Delete Session sxc
report Session Report Response sxc
add_rule Add a Rule sxc
delete_rule Delete a Rule sxc
location_report Initiate a Location Report Request lg
provide_location Initiate a Provide Location Request Lg application lg
mo_fwd_short_msg Initiate a MO Forward Short Message Request sgd
alert_svc_centre Initiate a Alert Service Centre Request sgd
mt_fwd_short_msg Initiate a MT Forward Short Message Request sgd
mo_fwd_short_msg Initiate a MO Forward Short Message Request gdd
alert_svc_centre Initiate a Alert Service Centre Request gdd
mt_fwd_short_msg Initiate a MT Forward Short Message Request gdd
send_routing_info_for_sm Initiate a Send Routing Info for SM Request s6c
report_sm_delivery_status Initiate a Report SM Delivery Status Request s6c
alert_svc_centre Initiate a Alert Service Centre Request s6c
routing_info Initiate a Routing Info Request SLh application slh
routing_info Initiate a Routing Info Request Lh application lh
location_request_geographic Initiate a Location Estimate from the SLs application sls
location_request_assistance Initiate Location Assistance request from the SLs application sls
reset_request Initiate a Reset Request from the SLs application sls
lpp_provide_capabilities Initiate an LPP Provide Capabilities Message sls
lpp_request_assistance Initiate an LPP Request Assistance Message sls
lpp_provide_location Initiate an LPP Provide Location Message sls
lppa_request_location Initiate an LPPA Request Location Message from the SLs application sls
lppa_location_request_otdoa Initiate a LPPa OTDOA Location Request. sls
location_response_geographic Initiate a Location Estimate Response from the SLs application sls
lpp_request_capabilities Initiate an LPP Request Capabilities Message sls
lpp_provide_assistance Initiate an LPP Provide Assistance Message sls
lpp_request_location Initiate an LPP Request Location Message sls
lpp_request_location_agnss Initiate an LPP Request Location Message with a request for a-gnss data. sls
lpp_request_location_otdoa Initiate an LPP Request Location Message with a request for OTDOA data. sls
lpp_request_location_ecid Initiate an LPP Request Location Message with a request for E-CID data. sls
http_get HTTP GET message received from subscriber SmartWeb
http_post HTTP POST message received from subscriber SmartWeb
send_email Generated an email from a subscriber sent successfully SmartWeb
post_event1 Received post_event1. Typically from HTTP POST (first "http" element within SmartWeb info), however may be from SmartEvents. SmartWeb
post_event2 Received post_event2. Typically from HTTP POST (second "http" element within SmartWeb info), however may be from SmartEvents. SmartWeb
post_event3 Received post_event3. Typically from HTTP POST (thrid "http" element within SmartWeb info), however may be from SmartEvents. SmartWeb
post_event4 Received post_event4. Typically from HTTP POST (fourth "http" element within SmartWeb info), however may be from SmartEvents. SmartWeb
post_event5 Received post_event5. Typically from HTTP POST (fifth "http" element within SmartWeb info), however may be from SmartEvents. SmartWeb
start Start a MBMS Session sm
restart Start a MBMS Session sm
update Update a MBMS Session sm
standby Stop a MBMS Session sm
stop Stop a MBMS Session sm
start Start a transaction using the selected state flow soap
timeout Trigger a timeout event on the state machine soap
unsupported Indicate the receipt of an unsupported message. soap
search Initiate a Search Request from the Sp/LDAP application or indicate complete (Done Msg) sp
search_entry Search Result from the Sp/LDAP application Search Request, but not yet complete (Done Msg) sp
modify Initiate a Modify Request from the Sp/LDAP application sp
add Initiate a Add Request from the Sp/LDAP application sp
delete Initiate a Delete Request from the Sp/LDAP application sp
compare Initiate a Compare Request from the Sp/LDAP application sp
auth Initiate an authentication, while idle sta
auth_cont Continuation of authentication (only for delayed response and SmartAVP) sta
reauth Initiate an (re)authentication, while not idle sta
detach Initiate a detach from the network sta
reauth Initiate a re-authentication from the STa application sta
reauthorize Initiate a re-authorization from the STa application sta
detach Initiate an abort-termination from the STa application sta
abort Initiate a network initiated session abort without the need for a separate termination from the STa application sta
auth Initiate an authentication swa
auth_cont Continuation of authentication (only for delayed response and SmartAVP) swa
detach Initiate a detach from the network swa
reauth Initiate a re-authentication from the SWa application swa
detach Initiate an abort-termination from the SWa application swa
abort Initiate a network initiated session abort without the need for a separate termination from the SWa application swa
auth Initiate an authentication, while idle swm
auth_cont Continuation of authentication (only for delayed response and SmartAVP) swm
reauth Initiate an (re)authentication, while not idle swm
detach Initiate a detach from the network swm
reauth Initiate a re-authentication from the SWm application swm
reauthorize Initiate a re-authorization from the SWm application swm
detach Initiate an abort-termination from the SWm application swm
abort Initiate a network initiated session abort without the need for a separate termination from the SWm application swm
auth Initiate a Multimedia Authorization Request from the SWx application swx
attach Initiate a Multimedia Authorization Request followed by a AAA Registration from the SWx application swx
reg Initiate a AAA Registration (Server Assignment) Request from the SWx application swx
dereg Initiate a AAA De-Registration (Server Assignment) Request from the SWx application swx
pull Initiate a AAA Registration (Server Assignment) Request from the SWx application, only to pull User Data (no affect on registration) swx
push Initiate a Push Profile Request from the (S)Wx application swx
dereg Initiate a De-Registration (Registration Termination) Request from the (S)Wx application swx
reset Initiate a Reset Request (Push Profile Request) to the current registered location. If a rate of 0 is provided (or no rate is configured), the reset is considered as a HSS node reset and the User-Name AVP contains a "*" (i.e. all UEs). If a rate is specified, the Reset Request is sent to each subscriber in the start/end range; if no range is set the request is sent to all subscribers. The reset event supports swx
init Causes an Intial Spending-Limit-Request (Sy' AAR) message to be sent to the OCS sy
update Causes an Intermediate Spending-Limit-Request (Sy' AAR) message to be sent to the OCS sy
terminate Initiate a Termination request from an active transaction sy
abort Initiate an Abort request from an active transaction sy
update Causes a Spending-Notification-Request message to be sent to the PCRF sy
terminate Sends a Spending-Notification-Request message to the PCRF requesting that the session be terminated. sy
abort Causes a Abort request to be sent to the PCRF sy
device_trigger Initiate a Device Trigger Request via T4 application t4
delivery_report Initiate a Delivery Report Request via T4 application t4
report_info Initiate a Reporting Information Request via T6 application. Can only receive if reported event subscriber specific. t6
mo_data Initiate a MO Data Request via T6 application t6
connect_mgmt Initiate a Connection Management Request via T6 application, for connection establishment t6
connect_mgmt_release Initiate a Connection Management Request via T6 application, for connection release t6
connect_mgmt_update Initiate a Connection Management Request via T6 application, for connection update t6
mt_data Initiate a MT Data Request via T6 application t6
config_info Initiate a Configuration Information Request via S6t application s6t
nidd_info Initiate a Non-IP Data Delivery Information Request via S6t application s6t
report_info Initiate a Reporting Information Request via S6t application s6t
device_trigger Initiate a Device Trigger Request via Tsp application tsp
delivery_report Initiate a Delivery Report Request via Tsp application tsp
verification User Plane verification succeeded UserData
basic_stop Basic Data stopped UserData
ipsec_start IPSec Tunnel start succeeded UserData
ipsec_stop IPSec Tunnel stop succeeded UserData
receive HTTP flow message receive http
received_unsupported HTTP flow message received undefine message http
failed HTTP flow failed http
user_event1 Send HTTP user event #1 http
user_event2 Send HTTP user event #2 http
user_event3 Send HTTP user event #3 http
user_event4 Send HTTP user event #4 http
user_event5 Send HTTP user event #5 http
protocol_failed client failed hls
redirect Client received redirect hls
timeout Client timed out hls
protocol_failed client failed has
redirect Client received redirect has
timeout Client timed out has
invite Send SIP Invite sip
trying Send SIP Trying sip
ringing Send SIP Ringing, this will be sent unreliably. sip
progress Send SIP Progress, this will be sent unreliably. sip
answer Send SIP Answer sip
cancel Send SIP CANCEL sip
disconnect Send SIP BYE/CANCEL sip
prack Send SIP PRACK sip
prack_complete Send SIP 200 OK for PRACK sip
update Send SIP UPDATE sip
update_complete Send SIP 200 OK for UPDATE sip
register Send SIP Register sip
deregister Send SIP Register with Zero Expiry Time sip
401_register Send SIP 401 Responsse for Register sip
register_complete Send SIP 200 OK for Register sip
reinvite Send SIP ReInvite, currently only supported on SipServerNode sip
auth Initiate an authentication wa
acct_start Initiate an Accounting Start wa
acct_interim Initiate an Accounting Interim wa
acct_stop Initiate an Accounting Stop wa
auth Initiate an authentication wg
auth_cont Continuation of authentication (only for delayed response and SmartAVP) wg
authorize Initiate an authentication wg
acct_start Initiate an Accounting Start wg
acct_interim Initiate an Accounting Interim update wg
acct_stop Initiate an Accounting Stop wg
terminate Initiate a Session Terminate wg
reauth Initiate a re-authentication from the Wg application wg
reauthorize Initiate a re-authorize from the Wg application wg
terminate Initiate a network initiated session abort without the need for a separate termination from the S6b application wg
push Initiate a Push Profile Request from the (S)Wx application wx
dereg Initiate a De-Registration (Registration Termination) Request from the (S)Wx application wx
auth Initiate a Multimedia Authorization Request from the Wx application wx
attach Initiate a Multimedia Authorization Request followed by a AAA Registration from the Wx application wx
reg Initiate a AAA Registration (Server Assignment) Request from the Wx application wx
dereg Initiate a AAA De-Registration (Server Assignment) Request from the Wx application wx
background_data_transfer Causes an Background Data Transfer Request message to be sent to the PCRF nt
background_data_transfer Causes an Background Data Transfer Answer message to be sent to the SCEF nt
retrieve_nssai Retrieve Network Slice Selection Assistance Information (NSSAI) nudm_sdm
retrieve_multi Retrieve Multiple Datasets nudm_sdm
retrieve_am_data Retrieve Access And Mobility Subscription Data nudm_sdm
retrieve_smf_sel_data Retrieve SMF Selection Subscription Data nudm_sdm
retrieve_sm_data Retrieve Session Management Subscription Data nudm_sdm
retrieve_sms_data Retrieve SMS Subscription Data nudm_sdm
subscription Send SDM Subscription request nudm_sdm
unsubscribe Send SDM Subscription delete request nudm_sdm
data_change Send dataChangeNotification to consumer 3GPP service nudm_sdm
ue_auth Initiate UE Authentication nausf_auth
aka_confirm Initiate 5G AKA Authentication Confirmation nausf_auth
eap_session Initiate EAP Authentication Session nausf_auth
ue_auth Initiate UE Authentication, which consists of a gen_auth_data transaction, followed by a succes or failed. nudm_ueau
gen_auth_data Initiate a gen_auth_data transaction, without a succes or failed. nudm_ueau
auth_success Initiate Authentication Success notification nudm_ueau
auth_failed Initiate Authentication Failed notification nudm_ueau
register Register a network function with an NRF nnrf_nfm
update Update the registration of a network function with an NRF nnrf_nfm
deregister Deregister a network function with an NRF nnrf_nfm
subscribe Subscribe to an NRF nnrf_nfm
unsubscribe Unsubscribe to an NRF nnrf_nfm
status Request status of a network function from an NRF nnrf_nfm
search Search for NF instances nnrf_disc
register_3gpp Register AMF for 3GPP service nudm_uecm
retrieve_3gpp Retrieve AMF for 3GPP service nudm_uecm
update_3gpp update AMF for 3GPP service nudm_uecm
register_non_3gpp Register AMF for Non-3GPP service nudm_uecm
retrieve_non_3gpp Retrieve AMF for Non-3GPP service nudm_uecm
register_smf Register SMF nudm_uecm
delete_smf Delete SMF registration nudm_uecm
register_smsf_3gpp Register SMSF for 3GPP service nudm_uecm
retrieve_smsf_3gpp Retrieve SMSF for 3GPP service nudm_uecm
deregister_smsf_3gpp Deregister SMSF for 3GPP service nudm_uecm
register_smsf_non_3gpp Register SMSF for Non-3GPP service nudm_uecm
retrieve_smsf_non_3gpp Retrieve SMSF for Non-3GPP service nudm_uecm
deregister_smsf_non_3gpp Deregister SMSF for Non-3GPP service nudm_uecm
deregister_3gpp Register AMF for 3GPP service nudm_uecm
establish PDU Session Establishment nsmf_pdu_session
release PDU Session Release nsmf_pdu_session
service_request PDU Session Service Request nsmf_pdu_session
add_rule Initiates adding a predefined rule. nsmf_pdu_session
qos_mod Initiates modification of qos parameters for a QoS Rule. nsmf_pdu_session
create_sm_context Create SM Context service operation shall be used to create an individual SM context, for a given PDU session. In order to establish the PDU Session, it must be followed by N1N2MessageTransfer service operation and the Update SM Context service operation. nsmf_pdu_session
update_sm_context Update SM Context service operation shall be used to update an individual SM context, for a given PDU session nsmf_pdu_session
retrieve_sm_context Retrieve SM Context service operation shall be used to retrieve an individual SM context, for a given PDU session nsmf_pdu_session
release_sm_context Release SM Context service operation shall be used to release an individual SM context, for a given PDU session nsmf_pdu_session
n2_resource_release_ack Simulate the receipt of N2 Resource Release ACK condition nsmf_pdu_session
activate_user_plane Activate the User Plane connection of a PDU session. This is used for "UE Triggered Service Request" Procedure. nsmf_pdu_session
deactivate_user_plane Deactivate the User Plane connection of a PDU session. This is used for "AN Release" Procedure. nsmf_pdu_session
n2_request_ack Simulate the receipt of N2 Request ACK condition nsmf_pdu_session
n2_handover Performs an N2 Handover. This event must be triggered on the target AMF node. nsmf_pdu_session
xn_handover Performs an XN Handover. This event must be triggered on the target AMF node. nsmf_pdu_session
registration UE Mobility Registration nsmf_pdu_session
eps_5g_registration EPS to 5G Mobility Registration nsmf_pdu_session
eps_5g_handover EPS to 5G Handover nsmf_pdu_session
5g_eps_handover 5G to EPS Handover nsmf_pdu_session
notify_sm_context_status The Notify SM Context Status service operation shall be used by the SMF to notify the NF Service Consumer about the status of an SM context related to a PDU session nsmf_pdu_session
n1n2_msg_transfer The N1N2MessageTransfer service operation is used by a NF Service Consumer to transfer N1 and/or N2 information to the UE and/or 5G-AN through the AMF namf_comm
n1_msg_notify The N1MessageNotify service operation is used by an AMF notifying the N1 message received from the UE to adestination CN NF namf_comm
release PDU Session Release namf_comm
activate_user_plane Activate the User Plane connection of a PDU session. This is used for "Network Triggered Service Request" Procedure. namf_comm
add_rule Initiates adding a predefined rule. namf_comm
n1n2_msg_transfer_fail The AMF uses this notification to inform the SMF that initiated an earlier N1N2MessageTransfer, that the AMF failed to deliver the N1 message to the UE as the UE failed to respond to paging namf_comm
ue_context_transfer This operation is invoked by the target AMF, towards the source AMF, to retrieve the UE Context in the source AMF. namf_comm
registration_status_update This operation is invoked by the target AMF, towards the source AMF, to update the status of UE registration at the target AMF, thereby indicating the result of previous UE Context transfer for a given UE namf_comm
create_ue_context This operation is invoked by the source AMF, towards the target AMF, when it can't serve the UE and selects the target AMF during the handover procedure, to create the UE Context in the target AMF. namf_comm
lpp_request_capabilities Initiate an LPP Request Capabilities Message namf_comm
lpp_provide_assistance Initiate an LPP Provide Assistance Message namf_comm
lpp_request_location Initiate an LPP Request Location Message namf_comm
n1n2_msg_subscribe Initiate an N1N2 Message Subscribe namf_comm
n1n2_msg_unsubscribe Initiate an N1N2 Message Unsubscribe namf_comm
send_sms Initiate MT SMS to the UE namf_comm
ue_policy_delivery Initiate UE Policy delivery to the UE namf_comm
non_ue_n2_info_subscribe Initiate an NonUeN2InfoSubscribe Message namf_comm
non_ue_n2_info_unsubscribe Initiate an NonUeN2InfoUnSubscribe Message namf_comm
warning_message_delivery Initiate a Warning Message using the NonUeN2MessageTransfer service operation to transfer N2 information to the 5G-AN through the AMF namf_comm
warning_message_cancel Initiate a Cancel Warning Message using the NonUeN2MessageTransfer service operation to transfer N2 information to the 5G-AN through the AMF namf_comm
n2_info_notify This operation is invoked by the AMF, to notify a NF Service Consumer that subscribed N2 information has been received from access network. namf_comm
lpp_provide_capabilities Initiate an LPP Provide Capabilities Message namf_comm
lpp_request_assistance Initiate an LPP Request Assistance Message namf_comm
lpp_provide_location Initiate an LPP Provide Location Message namf_comm
assign_ebi The EBIAssignment service operation is invoked by the SMF, towards the AMF, to request the AMF to allocate EPS bearer ID(s) towards EPS bearer(s) mapped from QoS flow(s) for an existing PDU Session for a given UE. namf_comm
create Create operation shall be used to create an individual context. npcf_sm_policy_control
update_plmn_change Update operation to indicate PLMN Change. npcf_sm_policy_control
update_res_mo_re Update operation to indicate Request for Resource Modification received. npcf_sm_policy_control
update_ac_ty_ch Update operation to indicate Access Type Change npcf_sm_policy_control
update_ue_ip_ch Update operation to indicate UE IP Address change. npcf_sm_policy_control
update_ue mac_ch Update operation to indicate UE MAC address change. npcf_sm_policy_control
update_an_ch_cor Update operation to indicate Access Network Charging Correlation Information. npcf_sm_policy_control
update_ue_re Update operation to indicate the PDU Session or the Monitoring key specific resources consumed UMC by a UE either reached the threshold or needs to be reported for other reasons. npcf_sm_policy_control
update_app_sta Update operation to indicate The start of application traffic has been detected. npcf_sm_policy_control
update_app_sto Update operation to indicate The stop of application traffic has been detected. npcf_sm_policy_control
update_an_info Update operation to indicate Access Network Information report. npcf_sm_policy_control
update_cm_ses_fail Update operation to indicate Credit management session failure. npcf_sm_policy_control
update_ps_da_off Update operation to indicate 3GPP PS Data Off status change. npcf_sm_policy_control
update_def_qos_ch Update operation to indicate Default QoS Change. npcf_sm_policy_control
update_se_ambr_ch Update operation to indicate Session AMBR Change. npcf_sm_policy_control
update_qos_notif Update operation to indicate QoS targets of the QoS Flow can/cannot be guaranteed. npcf_sm_policy_control
update_no_credit Update operation to indicate Out of credit. npcf_sm_policy_control
update_pra_ch Update operation to indicate Change of UE presence in Presence Reporting Area. npcf_sm_policy_control
update_sarea_ch Update operation to indicate Location Change with respect to the Serving Area. npcf_sm_policy_control
update_scnn_ch Update operation to indicate Location Change with respect to the Serving CN node. npcf_sm_policy_control
update_re_timeout Update operation to indicate PCC revalidation timeout. npcf_sm_policy_control
update_res_release Update operation to indicate outcome of the release of resources. npcf_sm_policy_control
succ_res_allo Update operation to indicate successful resource allocation. npcf_sm_policy_control
rat_ty_ch Update operation to indicate RAT type change. npcf_sm_policy_control
ref_qos_ind_ch Update operation to indicate Reflective QoS indication Change. npcf_sm_policy_control
delete Delete operation shall be used to delete an individual context. npcf_sm_policy_control
query Query operation shall be used to query an individual context. npcf_sm_policy_control
notify_update Server initiates notification of updates to SM Policy Control npcf_sm_policy_control
update_plmn_change Server initiates notification of an Update operation to indicate PLMN Change. npcf_sm_policy_control
update_res_mo_re Server initiates notification of an Update operation to indicate Request for Resource Modification received. npcf_sm_policy_control
update_ac_ty_ch Server initiates notification of an Update operation to indicate Access Type Change npcf_sm_policy_control
update_ue_ip_ch Server initiates notification of an Update operation to indicate UE IP Address change. npcf_sm_policy_control
update_ue mac_ch Server initiates notification of an Update operation to indicate UE MAC address change. npcf_sm_policy_control
update_an_ch_cor Server initiates notification of an Update operation to indicate Access Network Charging Correlation Information. npcf_sm_policy_control
update_ue_re Server initiates notification of an Update operation to indicate the PDU Session or the Monitoring key specific resources consumed UMC by a UE either reached the threshold or needs to be reported for other reasons. npcf_sm_policy_control
update_app_sta Server initiates notification of an Update operation to indicate The start of application traffic has been detected. npcf_sm_policy_control
update_app_sto Server initiates notification of an Update operation to indicate The stop of application traffic has been detected. npcf_sm_policy_control
update_an_info Server initiates notification of an Update operation to indicate Access Network Information report. npcf_sm_policy_control
update_cm_ses_fail Server initiates notification of an Update operation to indicate Credit management session failure. npcf_sm_policy_control
update_ps_da_off Server initiates notification of an Update operation to indicate 3GPP PS Data Off status change. npcf_sm_policy_control
update_def_qos_ch Server initiates notification of an Update operation to indicate Default QoS Change. npcf_sm_policy_control
update_se_ambr_ch Server initiates notification of an Update operation to indicate Session AMBR Change. npcf_sm_policy_control
update_qos_notif Server initiates notification of an Update operation to indicate QoS targets of the QoS Flow can/cannot be guaranteed. npcf_sm_policy_control
update_no_credit Server initiates notification of an Update operation to indicate Out of credit. npcf_sm_policy_control
update_pra_ch Server initiates notification of an Update operation to indicate Change of UE presence in Presence Reporting Area. npcf_sm_policy_control
update_sarea_ch Server initiates notification of an Update operation to indicate Location Change with respect to the Serving Area. npcf_sm_policy_control
update_scnn_ch Server initiates notification of an Update operation to indicate Location Change with respect to the Serving CN node. npcf_sm_policy_control
update_re_timeout Server initiates notification of an Update operation to indicate PCC revalidation timeout. npcf_sm_policy_control
update_res_release Server initiates notification of an Update operation to indicate outcome of the release of resources. npcf_sm_policy_control
succ_res_allo Server initiates notification of an Update operation to indicate successful resource allocation. npcf_sm_policy_control
rat_ty_ch Server initiates notification of an Update operation to indicate RAT type change. npcf_sm_policy_control
ref_qos_ind_ch Server initiates notification of an Update operation to indicate Reflective QoS indication Change. npcf_sm_policy_control
notify_terminate Server initiated termination of SM Policy Control npcf_sm_policy_control
notification Server initiates notification of updates nchf_spendinglimitcontrol
subscribe Subscribe operation shall be used to create an individual context nchf_spendinglimitcontrol
unsubscribe Unsubscribe operation shall be used to delete an individual context nchf_spendinglimitcontrol
notify Server initiates notification of updates nchf_convergedcharging
release Server initiated termination nchf_convergedcharging
create Create operation shall be used to create an individual context nchf_convergedcharging
update Update operation shall be used to update an individual context nchf_convergedcharging
release Delete operation shall be used to delete an individual context nchf_convergedcharging
determine_location The Nlmf_Location service enables an NF to request location determination (current geodetic and optionally civic location) for a target UE. nlmf_location
activate The Activate service operation shall be used by the NF Service Consumer to activate SMS service for a given service user. nsmsf_sm_service
deactivate The Deactivate service operation shall be used by the NF Service Consumer to deactivate SMS service for a given service user. nsmsf_sm_service
send_sms Initiate MO SMS from the UE. nsmsf_sm_service
reset_protocol Reset the protocol state machine nsmsf_sm_service
enable_ue_reachability The Enable UE Reachability service operation shall be used by the NF Service Consumer to enable reachability of the UE. namf_mt
reset_protocol Reset the protocol state machine namf_mt
registration This service operation shall be used by the NF Service Consumer to Retrieve the network slice information during the Registration procedure. nnssf_ns_selection
pdu_session_est This service operation shall be used by the NF Service Consumer to Retrieve the network slice information during the PDU Session Establishment procedure. nnssf_ns_selection
ue_config_update This service operation shall be used by the NF Service Consumer to Retrieve the network slice information during the UE Configuration Update procedure. nnssf_ns_selection
reset_protocol Reset the protocol state machine nnssf_ns_selection
create This service operation shall be used by an NF Service Consumer (e.g. AMF) to create the NSSAI Availability information of the NF nnssf_nssai_availability
update This service operation shall be used by the NF Service Consumer(e.g. AMF) to update the NSSAI Availability information of the NF. nnssf_nssai_availability
subscribe This service operation shall be used by the NF Service Consumer (e.g. AMF) to subscribe to a notification of any changes in status of the NSSAI availability information. nnssf_nssai_availability
unsubscribe This service operation shall be used by the NF Service Consumer(e.g. AMF) to unsubscribe to a notification of any previously subscribed changes to the NSSAI availability information. nnssf_nssai_availability
delete This service operation shall be used by the NF Service Consumer(e.g. AMF) to delete the NSSAI availability information stored for the NF service consumer in the NSSF. nnssf_nssai_availability
reset_protocol Reset the protocol state machine nnssf_nssai_availability
notify This service operation shall be used by the NSSF to update the NF Service Consumer (e.g. AMF) with any change in status, on a per TA basis, of the S-NSSAIs available per TA (unrestricted) and the S-NSSAIs restricted per PLMN in that TA in the serving PLMN of the UE. nnssf_nssai_availability
create Create operation shall be used to create an individual context. npcf_am_policy_control
update_loc_ch Update operation to indicate Location change (tracking area): the tracking area of the UE has changed. npcf_am_policy_control
update_pra_ch Update operation to indicate Change of UE presence in PRA: the UE is entering/leaving a Presence Reporting Area. npcf_am_policy_control
update_serv_area_ch Update operation to indicate Service Area Restriction change: the UDM notifies the AMF that the subscribed service area restriction information has changed. npcf_am_policy_control
update_rfsp_ch Update operation to indicate RFSP index change: the UDM notifies the AMF that the subscribed RFSP index has changed. npcf_am_policy_control
update_allowed_nssai_ch Update operation to indicate Allowed NSSAI change: the AMF notifies that the set of UE allowed S-NSSAIs has changed. npcf_am_policy_control
update_ue_ambr_ch Update operation to indicate UE-AMBR change: the UDM notifies the AMF that the subscribed UE-AMBR has changed. npcf_am_policy_control
update_smf_select_ch Update operation to indicate SMF selection information change: UE request for an unsupported DNN or UE request for a DNN within the list of DNN candidates for replacement per S-NSSAI. npcf_am_policy_control
access_type_ch Update operation to indicate Access Type change: the AMF notifies that the access type and the RAT type combinations available in the AMF for a UE with simultaneous 3GPP and non-3GPP connectivity has changed. npcf_am_policy_control
rg_tmbr_ch Update operation to indicate The Subscribed RG-TMBR change: the UDM notifies the AMF that the subscribed RG-TMBR has changed. npcf_am_policy_control
delete Delete operation shall be used to delete an individual context. npcf_am_policy_control
notify_update Server initiates notification of updates to AM Policy Control npcf_am_policy_control
notify_terminate Server initiated termination of AM Policy Control npcf_am_policy_control
create The Create service operation is used by an NEF to retrieve BDT policies from the PCF. npcf_bdt_policy_control
update The Update service operation is used by an NEF to update a BDT policy to the PCF. npcf_bdt_policy_control
get The Get service operation is used by an NEF to retrieve a BDT policy from the PCF. npcf_bdt_policy_control
notify The Notify service operation is used by the PCF to send the BDT notification to the NEF. npcf_bdt_policy_control
create Create operation shall be used to create an individual context. npcf_ue_policy_control
update_loc_ch Update operation to indicate Location change (tracking area): the tracking area of the UE has changed. npcf_ue_policy_control
update_pra_ch Update operation to indicate Change of UE presence in PRA: the UE is entering/leaving a Presence Reporting Area. npcf_ue_policy_control
update_ue_policy Update operation to indicate UE Policy change. npcf_ue_policy_control
update_plmn_ch Update operation to indicate PLMN change: the UEF notifies that the set of UE allowed S-NSSAIs has changed. npcf_ue_policy_control
update_con_state_ch Update operation to indicate Connectivity state change: the connectivity state of UE has changed.. npcf_ue_policy_control
delete Delete operation shall be used to delete an individual context. npcf_ue_policy_control
notify_update Server initiates notification of updates to UE Policy Control npcf_ue_policy_control
notify_terminate Server initiated termination of UE Policy Control npcf_ue_policy_control
provide_positioning_info This service operation shall be invoked by the GMLC to request the current or deferred geodetic and optionally civic location of the UE namf_location
cancel_location This service operation shall be invoked by the GMLC to cancel reporting periodic or events triggered location namf_location
event_notify This service operation notifies the GMLC about a UE location related event information related to emergency sessions or deferred location, i.e. the initiation, handover or termination of an emergency session or the completion or activation of deferred location. namf_location
location_update This service operation enables the AMF to update UE location information towards the GMLC. ngmlc_location
get_am_data Retrieves the access and mobility policy data for a subscriber. HTTP GET method shall be used for this service operation. nudr_dr
get_ue_policy_set Retrieves the UE policy set data for a subscriber. HTTP GET method shall be used for this service operation. nudr_dr
create_ue_policy_set Create the UE policy set data for a subscriber. HTTP PUT method shall be used for this service operation. nudr_dr
modify_ue_policy_set Modify the UE policy set data for a subscriber. HTTP PATCH method shall be used for this service operation. nudr_dr
get_sm_data Retrieves the session management policy data for a subscriber. HTTP GET method shall be used for this service operation. nudr_dr
modify_sm_data Modify the session management policy data for a subscriber. HTTP PATCH method shall be used for this service operation. nudr_dr
get_usage_monitoring_information Retrieves the usage monitoring data for a subscriber. HTTP GET method shall be used for this service operation. nudr_dr
create_usage_monitoring_information Create the usage monitoring data for a subscriber. HTTP PUT method shall be used for this service operation. nudr_dr
delete_usage_monitoring_information Delete the usage monitoring data for a subscriber. HTTP DELETE method shall be used for this service operation. nudr_dr
get_operator_specific_data Retrieves the operator specific policy data for a subscriber. HTTP GET method shall be used for this service operation. nudr_dr
patch_operator_specific_data Modify the operator specific policy data for a subscriber. HTTP PATCH method shall be used for this service operation. nudr_dr
modify_operator_specific_data Modify the operator specific policy data for a subscriber. HTTP PUT method shall be used for this service operation. nudr_dr
get_sponsor_connectivity_data Retrieves the sponsored connectivity information for a given sponsorId. HTTP GET method shall be used for this service operation. nudr_dr
get_bdt_data Retrieves the BDT data collection. HTTP GET method shall be used for this service operation. nudr_dr
get_individual_bdt_data Retrieves the BDT data information associated with a BDT reference Id. HTTP GET method shall be used for this service operation. nudr_dr
create_individual_bdt_data Creates an BDT data resource associated with an BDT reference Id. HTTP PUT method shall be used for this service operation. nudr_dr
delete_individual_bdt_data Delele an BDT data resource associated with an BDT reference Id. HTTP DELETE method shall be used for this service operation. nudr_dr
create_policy_data_subscr Create a subscription to receive notification of policy data changes. HTTP POST method shall be used for this service operation. nudr_dr
modify_individual_policy_data_subscrs Modify a subscription to receive notification of policy data changes. HTTP PUT method shall be used for this service operation. nudr_dr
delete_individual_policy_data_subscr Delete a subscription to receive notification of policy data changes. HTTP DELETE method shall be used for this service operation. nudr_dr
get_plmn_ue_policy_set Retrieve the UE policy set data for a H-PLMN. HTTP GET method shall be used for this service operation. nudr_dr
create_subscribe The Create Subscribe service operation is invoked by the NEF, towards the AMF, when it needs to create a subscription to monitor at least one event relevant to the AMF. namf_event_exposure
modify_subscribe The Modify Subscribe service operation is invoked by the NEF, towards the AMF, when it needs to modify an existing subscription previously created by itself at the AMF. namf_event_exposure
unsubscribe The Unsubscribe service operation is invoked by the NEF, towards the AMF, to remove an existing subscription previously created by itself at the AMF. namf_event_exposure
notify The Notify service operation is invoked by the AMF, to send a notification, towards the notification URI, when certain event included in the subscription has taken place. namf_event_exposure
end Initiates a transaction_end event on the subscribers event chain SmartEvents
user_event1 Initiates a user defined event on the subscribers event chain SmartEvents
user_event2 Initiates a user defined event on the subscribers event chain SmartEvents
user_event3 Initiates a user defined event on the subscribers event chain SmartEvents
user_event4 Initiates a user defined event on the subscribers event chain SmartEvents
user_event5 Initiates a user defined event on the subscribers event chain SmartEvents
protocol_failed The protocol state machine encountered a failure. Valid only for Diameter applications. *
received_error The protocol received a message from the peer (result code greater than or equal to 3000). SmartConditional may be used to test the value. *
no_response The protocol did not receive a response for a request sent. Valid only for Diameter applications. Only invoked after any configure retries have been exhausted, and also invoked for DIAMETER_TOO_BUSY result code received. *
PARENT ELEMENTS

Parent

Type
Event Received <event_received> SmartEventType