RESTRICTIONS |
DESCRIPTION |
USED IN |
|
Used to clear all set event triggers. |
Gx |
| SGSN_CHANGE |
Used to request new PCC rules upon SGSN change. |
Gx |
| QOS_CHANGE |
Used to request new PCC rules upon QoS change. |
Gx,Gxx |
| RAT_CHANGE |
Used to request new PCC rules upon RAT change. |
Gx, Gxx |
| TFT_CHANGE |
Used to request new PCC rules upon TFT change. |
Gx, Gxx |
| PLMN_CHANGE |
Used to request new PCC rules upon PLMN change. |
Gx |
| LOSS_OF_BEARER |
Used to request new PCC rules upon loss of bearer. |
Gx,Gxx |
| RECOVERY_OF_BEARER |
Used to request new PCC rules upon recovery of bearer. |
Gx, Gxx |
| IP-CAN_CHANGE |
Used to request new PCC rules upon change of IP-CAN. |
Gx |
| QOS_CHANGE_EXCEEDING_AUTHORIZATION |
Used to request new PCC rules upon QoS change exceeding authorization. |
Gx |
| RAI_CHANGE |
Used to request new PCC rules upon RAI change. |
Gx, Gxx |
| USER_LOCATION_CHANGE |
Used to tell PCEF that no User Location Change events require a trigger. |
Gx, Gxx |
| NO_EVENT_TRIGGERS |
Used to tell PCEF that no triggers are needed. |
Gx, Gxx, Sd |
| OUT_OF_CREDIT |
Used to request new PCC rules when credit no longer available. |
Gx, Sd |
| REALLOCATION_OF_CREDIT |
Used to request new PCC rules upon reallocation of credit. |
Gx, Sd |
| REVALIDATION_TIMEOUT |
Used to request new PCC rules upon revalidation timeout. |
Gx, Sd |
| UE_IP_ADDRESS_ALLOCATE |
Used to request new PCC rules when UE IPv4 address is allocated. |
Gx |
| UE_IP_ADDRESS_RELEASE |
Used to request new PCC rules upon UI IPv4 address release. |
Gx |
| DEFAULT_EPS_BEARER_QOS_CHANGE |
Used to request new PCC rules upon a change in the default EPS Bearer QoS. |
Gx, Gxx |
| AN_GW_CHANGE |
Used to request new PCC rules upon change in AN GW. |
Gx |
| SUCCESSFUL_RESOURCE_ALLOCATION |
Used to request new PCC rules upon successful resource allocation. |
Gx, Gxx |
| RESOURCE_MODIFICATION_REQUEST |
Used to request new PCC rules upon resource modification request. |
Gx, Gxx |
| PGW_TRACE_CONTROL |
Indicates a request to activate or deactivate trace. |
Gx, Gxx |
| UE_TIME_ZONE_CHANGE |
Used to request new PCC rules upon UE timezone change. |
Gx, Gxx |
| TAI_CHANGE |
Used by PCRF to request PCC rules upon a TAI change. |
Gx, Gxx |
| ECGI_CHANGE |
Used by PCRF to request PCC rules upon an ECGI change. |
Gx, Gxx |
| CHARGING_CORRELAION_EXCHANGE |
Used to request that the PCEF shall report the access network charging identifier associated to one or more
dynamic PCC Rules. |
Gx, Gxx |
| APN-AMBR_MODIFICATION_FAILURE |
The PCEF shall use this value to indicate to the PCRF that APN-AMBR modifications have failed. The PCEF shall
use this value in a new CCR command that indicates the failure of either a PUSH initiated modification or a
PULL initiated modification. This event trigger needs no subscription. Applicable to functionality introduced
with the Rel8 feature as described in clause 5.4.1. |
Gx, Gxx |
| USER_CSG_INFORMATION_CHANGE |
The PCRF shall use this value to indicate a request of reporting the event that the user enters/leaves a CSG cell.
When the user enters a CSG cell, the User-CSG-Information AVP shall also be provided with the event report in the
CCR command. Applicable to functionality introduced with the Rel9 feature as described in clause 5.4.1. |
Gx, Gxx |
| USAGE_REPORT |
This value shall be used in a CCA and RAR commands by the PCRF when requesting usage monitoring at the PCEF. The
PCRF shall also provide in the CCA or RAR command the Usage-Monitoring-Information AVP(s) including the Monitoring-
Key AVP and the Granted-Service-Unit AVP.
When used in a CCR command, this value indicates that the PCEF generated the request to report the accumulated usage
|
Gx, Sd |
| DEFAULT-EPS-BEARER-QOS_MODIFICATION_FAILURE |
The PCEF shall use this value to indicate to the PCRF that Default EPS Bearer QoS modifications have failed. The
PCEF shall use this value in a new CCR command that indicates the failure of either a PUSH initiated modification
or a PULL initiated modification. This event trigger needs no subscription. Applicable to functionality
introduced with the Rel8 feature as described in clause 5.4.1. |
Gx, Gxx |
| USER_CSG_HYBRID_SUBSCRIBED_INFORMATION_CHANGE |
The PCRF shall use this value to indicate a request of reporting the event that the user enters/leaves a hybrid
cell that the user subscribes to.
When the user enters a hybrid cell where the user is a member, the User-CSG-Information AVP shall also be provided
with the event report in the CCR command. Applicable to functionality introduced with the Rel9 feature as described
|
Gx, Gxx |
| USER_CSG_HYBRID_UNSUBSCRIBED_INFORMATION_CHANGE |
The PCRF shall use this value to indicate a request of reporting the event that the user enters/leaves a hybrid cell
that the user does not subscribe to.
When the user enters a hybrid cell where the user is not a member, the User-CSG-Information AVP shall be provided with
the event report in the CCR command. Applicable to functionality introduced with the Rel9 of Gx |
Gx, Gxx |
| ROUTING_RULE_CHANGE |
When used in a CCR command, this value indicates that the PCEF generated the request because there has been a change
in the IP flow mobility routing rules for flow mobility (installation/modification/removal of the IP flow mobility
routing rule). The new IP flow mobility routing rule information shall be provided in the Routing‑Rule‑Definition AVP
within the same CCR command. This event trig |
Gx |
| MAX_MBR_APN_AMBR_CHANGE |
When used in a CCR command, this value indicates that the PCEF generated the request because there has been a change of
MBR/APN-AMBR, Maximum-Bandwidth AVP is required to be provided in the same request with the new value. This event trigger
needs no subscription. Applicable only to 3GPP-GPRS and 3GPP-EPS access types. |
Gx, Gxx |
| APPLICATION_START |
This value shall be used in CCA and RAR commands by the PCRF to indicate that the PCEF shall inform the PCRF when the
start of the application’s traffic for the application, required for detection, has been identified.
When used in a CCR command, this value indicates that the PCEF identified the start of the corresponding application’s
traffic for an application identified by a TDF-Applicatio |
Gx, Sd |
| APPLICATION_STOP |
This value shall be used in a CCA and RAR commands by the PCRF to indicate that the PCEF shall inform the PCRF when the
stop of the application’s traffic for the application, required for detection, has been identified.
When used in a CCR command, this value indicates that the PCEF identified the stop of the corresponding application’s
traffic for an application identified by a TDF-Applicati |
Gx, Sd |
| ADC_REVALIDATION_TIMEOUT |
This value shall be used in CCA and RAR commands by the PCRF to indicate that upon ADC revalidation timeout, the PCEF shall
inform the PCRF. When used in a CCR command, this value indicates that the PCEF generated the request because there has
been an ADC revalidation timeout. |
Gx, Gxx |
| CS_TO_PS_HANDOVER |
This value shall be used in CCA and RAR command by the PCRF to indicate that upon a CS to PS Handover, the PCEF shall inform
the PCRF. When used in a CCR command, this value indicates that the PCEF generated the request because there is a CS to PS
handover. Applicable only to CS to PS SRVCC functionality feature (rSRVCC). |
Gx,Gxx |
| UE_LOCAL_IP_ADDRESS_CHANGE |
When used in a CCR command, this value indicates that the PCEF generated the request because the UE Local IP Address assigned
by the Fixed Broadband Access has changed. The UE-Local-IP-Address AVP shall be provided in the same request. This event
trigger does not require to be provisioned by the PCRF. Applicable to functionality introduced with the EPC-routed
feature. |
Gx, Gxx |
| NB_LOCAL_IP_ADDRESS_CHANGE |
When used in a CCR command, this value indicates that the PCEF generated the request because the H(e)NB Local IP Address
assigned by the Fixed Broadband Access has changed. The HeNB-Local-IP-Address AVP shall be provided in the same request.
This event trigger does not require to be provisioned by the PCRF. Applicable to functionality introduced with the EPC-routed
feature. |
Gx, Gxx |
| ACCESS_NETWORK_INFO_REPORT |
This value shall be used in CCA and RAR commands by the PCRF to indicate that upon completion of an IP-CAN bearer establishment,
modification or termination procedure, or upon termination of the IP-CAN session, and if the AF requests the PCRF to report
the access network information, the PCEF shall report the corresponding user location and/or UE Timezone to the PCRF accordingly.
When used in a |
Gx, Gxx |